食品搅拌桨简介：

该食品搅面桨可用于加工面包、面团、披萨等面食。搅面桨的设计带有螺旋曲线形，机器运转时面团不断上、下翻转挤压。使其将面团的韧性，充分挖掘出，做出的面食有弹性、口感好。

食品搅拌桨特点：

◆ 直径与搅拌桶直径相匹配，运转时桶底至搅拌桨的搅拌平面形成等距运转。

◆ 纵横肋条成一定角度，搅拌更充分，效率更显著。

◆ 标准化卡销，装拆迅速，替换方便。

◆ 铸铝或不锈钢制作。

设备技术参数：

材质：铸铝或不锈钢材质

设备保养及简单说明：

定期卸下清洗、保持内外清洁。

食品搅拌桨备注：以上设备及配套部件除公司原有规格外，也可根据客户提供的要求生产。

Impeller's brief introduction:

Stir surface propeller can be used to the food processing bread, pasta, pizza, pasta, etc. Stir with spiral curve surface of blade design, machine when the dough is upper and lower roll extrusion. Make the dough tenacity, fully excavated, make pasta flexible and good taste.

Impeller features:

Diameter match the mixing barrel diameter, barrel during operation to the highest stirring impeller plane form isometric operation.

Vertical and horizontal rib with a certain Angle, stir more fully, more significant efficiency.

Standardized card pin, quick installation, easy replacement.

Pieces of casting aluminum or stainless steel.

Equipment technical parameters:

Material: cast aluminum or stainless steel material

Equipment maintenance and simple instructions:

Periodically remove cleaning, keep clean inside and outside.

Note: the above equipment and related parts in addition to the company the original specification, also can according to the requirements of customers to provide production.