FC-WII机型特点： 1·复卷控制：全自动气动比例阀控制芯轴夹持装置提升，气压伺服系统控制骑辊压力，气动顶针夹持芯轴； 2分切下刀刀组：整体式刀轴，套满多刃刀套/可移动两刃刀套；可选底刀快速更换功能； 3·前后复卷辊差速+骑辊控制成品密度及盘端整齐度； 4后架：有轴式/无轴式，下压式/底托式/侧压式，可选正反转功能，方便操作，独立驱动导辊和托纸辊，无需托纸平台，减少伸长率损失； 5·的压光技术：高硬合金钢镀硬铬抛光压光棍，分单电机和双电机驱动两条压光棍，采用气胎加压方式，契形垫块微调间隙，可调整两辊交叉角度补偿中高； 6.配翻斗作运行保护； 7.自动落芯轴功能； 8.气动比例阀（机型：2950）；液压伺服阀控制骑辊（机型：3750/4030）； 9.可选自动插拔轴系统，方便操作，提高效率； 10.标配辅助散纸辊。 Features of FC-WII models: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the pneumatic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2-part cutting blade set: integral blade shaft, fully covered with multi blade blade sleeve/movable two blade blade sleeve; Optional bottom knife quick replacement function; 3. Front and rear rewinding roller differential speed+ride roller control for finished product density and disc end uniformity; 4. Rear frame: axial/non axial, downward pressure/bottom support/side pressure, with optional forward and reverse functions for easy operation. It independently drives the guide roller and paper support roller, without the need for a paper support platform, reducing elongation loss; 5. Leading calendering technology: High hardness alloy steel plated with hard chromium polishing calendering rod, divided into single motor and dual motor drive two calendering rods, using pneumatic tire pressure method, wedge shaped cushion block fine adjustment gap, adjustable cross angle between two rollers to compensate for medium high; 6. Equipped with a flip bucket for operation protection; 7. Automatic core dropping function; 8. Pneumatic proportional valve (model: 2950); Hydraulic servo valve control roller (model: 3750/4030); 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Standard auxiliary loose paper roller.