FC-V机型特点： 1·复卷控制：全自动气动比例阀控制芯轴夹持装置提升，液压伺服系统控制骑辊压力，气动顶针夹持芯轴； 2.分切下刀：每把底刀均由独立的外转子电机驱动； 3.前后复卷辊差速+骑辊控制成品密度及盘端整齐度；精确的对刀控制，误差±0.1mm； 4·后架：可正反转，方便操作；独立驱动导辊，底部配导纸平台，减少伸长率损失； 5·的压光技术：钢对钢压光，两条压光辊均由冷硬铸铁制成，且由两个电机分别驱动；气胎加压；可调整的压光间隙；可调整交叉角度补偿中高； 6·配防护闸刀，进行运行保护，断纸； 7.自动落芯轴功能； 8.液压比例阀控制骑辊，气动提升收卷芯轴； 9.可选自动插拔轴系统，方便操作，提高效率； 10.可选辅助散纸辊。 FC-V model features: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the hydraulic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2. Cutting knife: Each bottom knife is driven by an independent outer rotor motor; 3. The differential speed of the front and rear rewinding rollers+the control of the density of the finished product and the neatness of the disc end by the riding roller; Accurate tool setting control with an error of ± 0.1mm; 4. Rear frame: capable of forward and reverse rotation, convenient for operation; Independently driven guide roller, equipped with a paper guide platform at the bottom to reduce elongation loss; 5. Leading calendering technology: steel to steel calendering, with two calendering rollers made of chilled cast iron and driven by two separate motors; Pneumatic tire compression; Adjustable pressure gap; Adjustable cross angle compensation medium high; 6. Equipped with protective knife for operation protection and paper breakage; 7. Automatic core dropping function; 8. The hydraulic proportional valve controls the riding roller and pneumatically lifts the winding core shaft; 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Optional auxiliary loose paper roller.