REXROTH MSK071D-0300-NN-M2-UG0-RNNN伺服电机
1.产 品 介 绍
品牌:REXROTH
型号说明:REXROTH MSK071D-0300-NN-M2-UG0-RNNN伺服电机
优势:供应进口原装,专业停产配件。
公司主营特点:主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
2.产 品 详 情 资 料:
REXROTH MSK071D-0300-NN-M2-UG0-RNNN输入/输出模块的电源可通过前侧的电缆插头或已集成在输入/输出总线板中的连接(用于(Ex)I模块和部分模拟输入模块)。L-也取自插入式配电装置,连接至电位分配器XG。11(如果2极连接的输出模块与多达4条馈线一起使用,则至少两次)。因此,所有配电模块F 7133都与L-。通过配电模块的前侧,L-也通过电缆插头输入/输出模块。为传感器供电的电路由REXROTH MSK071D-0300-NN-M2-UG0-RNNN模块的前部熔断。建议通过配电模块REXROTH MSK071D-0300-NN-M2-UG0-RNNN5 V直流电源和配电的同一电路为输入模块和相关传感器供电。I/O子架的5 V直流系统电压取自机架后侧的分配器XG.2和XG.3的扁平插头。电源连接到相应标记的扁平插头XG上的I/O子架。4用于+5 V DC,XG.12用于I/O子架后侧的GND。电源通过总线板内部分配给I/O模块。REXROTH MSK071D-0300-NN-M2-UG0-RNNN
The supply of the I/O modules is either via the cable plug on the front side or via the connection already integrated in the I/O busboard (for (Ex)i modules and partly analog input modules). L- is also taken from the plug-in power distribution unit to be connected to the potential distributor XG. 11 (at least two times, if 2-pole connected output modules are used with up to 4 feeding lines). So all power distribution modules F 7133 are internal connected with L-. Via the front side of the power distribution modules the L- is also fed to the input/output modules via the cable plugs. The circuit feeding the sensors is fused by the front of the F 7133 module. It is advisable to supply the input module and the appertaining sensors via the same circuit of the power distribution module REXROTH MSK071D-0300-NN-M2-UG0-RNNN.5 V DC Supply and Distribution The 5 V DC system voltage for the I/O subracks is taken from the flat pin plugs of the distributors XG.2 and XG .3 on the rear side of the central rack. The power is connected to the I/O subracks on the accordingly marked flat pin plugs XG. 4 for +5 V DC and XG.12 for GND on the rear side of the I/O subracks. The power is internally distributed to the I/O modules via the bus board.REXROTH MSK071D-0300-NN-M2-UG0-RNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司,转载请附上此链接:
所有评论仅代表网友意见,与本站立场无关。