REXROTH MKE098B-047-KP1-BENN永磁电机
1.产 品 介 绍
品牌:REXROTH
型号说明:REXROTH MKE098B-047-KP1-BENN永磁电机
优势:供应进口原装,专业停产配件。
公司主营特点:主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
2.产 品 详 情 资 料:
REXROTH MKE098B-047-KP1-BENN2个带电流隔离的RS 485接口。传输速率:57600 bps。通过开关设置为9600 bps和57600 bps,或通过软件设置其他传输速率(软件值具有优先级)–诊断显示和2个LED,用于系统外信息、I/O级别和用户程序–电源监控–用于连接到输入/输出模块的I/O总线逻辑硬件时钟、,电池备份–故障保护看门狗–通过模块上的电池对sRAM进行电池备份,并进行监控。4.3.3协处理器模块REXROTH MKE098B-047-KP1-BENN的每个已安装模块旁边,最多可安装三个协处理器模块。协处理器模块主要包括:–时钟频率为10 MHz的微处理器HD 64180–操作系统EPROM–PLC主项目的RAM注:主项目的内存通过监控模块上的电池进行缓冲。–两个接口RS 485,通过通信软件构建块将波特率设置为57600 bps–双端口RAM(DPR),用于通过总线1与模块通信。REXROTH MKE098B-047-KP1-BENN
REXROTH MKE098B-047-KP1-BENN2 interfaces RS 485 with galvanic isolation. Transmission rate: max. 57600 bps. Set to 9600 bps and to 57600 bps by switch, or setting also of other transmission rates by software (the software values have priority) – Diagnostic display and 2 LEDs for information out of the system, I/O level and user`s program – Power supply monitoring – I/O-Bus logic for the connection to the input/output modules Hardware clock, battery backed – Fail-safe watchdog – Battery backup of the sRAMs via batteries on the central module with monitoring. 4.3.3 Coprocessor ModuleREXROTH MKE098B-047-KP1-BENNNext to each installed central module of the H51q-H PES up to three coprocessor modules can be installed. The coprocessor module mainly contains: – Microprocessor HD 64180 with a clock frequency of 10 MHz – Operating system EPROM – RAM for a PLC master project Note: The RAM for the master project is buffered via the batteries on the monitoring module. – Two interfaces RS 485, via communication software building block setting of the baud rate up to 57600 bps – Dual port RAM (DPR) for the communication with the central module via Bus 1.REXROTH MKE098B-047-KP1-BENN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司,转载请附上此链接:
所有评论仅代表网友意见,与本站立场无关。