供应BXK8050防爆控制箱产品特点

　　1.外壳采用玻璃纤维增强不饱和聚酯树脂模压而成或采用不锈钢成形；

　　2.本产品采用曲路密封结构，直接用紧固件，具有良好的防水防尘性能；

　　3.本系列产品适用于交流50HZ，电压380V以下，直流到440V以下，电流10A以内的控制电路中，作为工作现场中电动机的起停、控制转换、信号切换、仪表计量显示等之用；

　　4.内装元件主要有：*转换开关、按钮、电流表、指示灯等；

　　5.产品出厂铭牌上只体现总单元内容，各分单元代号为订货参数。

供应BXK8050防爆控制箱技术参数

　　1.防护等级：IP65

　　2.防腐等级：WF2

　　3.使用类别：AC-3、AC-4

　　4.额定电压：220V/380V

　　5.额定电流：10A

　　6.进线口螺纹：G1"

　　7.电缆外径：Φ12mm～Φ17mm

　　英文翻译The 1. shell of BXK8050 explosion-proof control box is made of glass fiber reinforced unsaturated polyester resin to form or adopt stainless steel forming. 2. this product uses curved seal structure, direct fastener, good waterproof and dustproof property; 3. series of products are suitable for AC 50HZ, voltage below 380V, DC In the control circuit below 440V, the control circuit within 10A is used as the starting and stopping of the motor, control conversion, signal switching, instrument measurement display and so on. The 4. internal components are mainly: universal switching switch, button, ammeter, indicator lamp, etc.; the total unit content of the 5. product factory nameplate is only reflected in the contents of the total unit. The unit code is the order parameter. BXK8050 explosion-proof control box 1. protection grade: IP65 protection grade 2. anticorrosion grade: WF2, 3. use category: AC-3, AC-4, 4. rated voltage: 220V/380V, 5. rating current: 10A, 6. inlet thread: G1, 7. cable outer diameter: 12mm to 17mm