设备主要用途/ Main Application:
主要用于外层有孔的对板面要求较高的PCB板的收板.也可用于内层收板.如:SES线外层前处理、喷锡后处理
It is mainly used for collecting the PCBs with high requirement and holes on the surface in O/L treatment line and it can also be used in I/L such as pretreatment of SES line, post-treatment of tin
spraying.
适用板件规格/Device Spec: Max:610mm*610mm Min：250mm*250mm
厚度/Thickness: 0.1mm-3.2mm 产速/Capacity: 10panels/min

设备特点:
1、较适用于表面有孔的板件。
2、具有二段式整板装置，拍薄板不会有拱起 现象。
3、配合各种板件，人机面板调整参数，达到工作效能。
4、板架交换时具有暂存板件功能。
5、具有夹纸功能。
6、设备耗电，耗气低且具有省电模式
Features:
1. Apply for the board with holes on its surface.
2. Equipped with alignment device via 2 speeds not to cause bendswhen arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. With buffer function when changing the rack.
5. With plastic film suction function.
6. With low power consumption and air consumption and it also has a power saving model.