产品说明 / Introduction
| IEC60884-1、GB2099.1、VDE0620-2010第24章、GB/T2423.8、BS1363-1、EN50075 Figure 8 | |||
| 本机测试插头线在经过一定次数自由跌落后与可靠度。试法是把插头含后端电源线100mm 处剪断，作为试件，投入滚桶内，依试件重量设定标准所要求之跌落次数，使试件连续落下撞击，到达设定次数后，本机自动停机，然后取出试件检查受损程度。 | |||
| Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel，then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen (which is subject to the above successive drops and impacts) after the preset numbers are reached。Also can be used as a drying oven byintroducing web-frame。 | |||
| 备注： | |||
| ◎ BS1363-1 滚桶材质为木板。 | |||
| ◎ GB2099.1 和 VDE0620 滚桶上下底板材质为钢板。 | |||
| ◎ 机身为成型铝材，美观大方。 | |||
| 基本规格： | Description: | ||
| 滚动速度： | Tumbling speed | 5 r.p.m ( 即每分钟跌落 10 次 Drop 10 times / min ) | |
| 计 数 器： | 电子式，8 位数，到达设定次数自动停机 | ||
| Counter | Electronic type 6 digits，auto-stop duringthe preset numbers are reached | ||
| 电源 | Power | AC 220V / 50Hz | |
所有评论仅代表网友意见，与本站立场无关。