技术参数表
| 规格表Specification | |||
| 型号Model | Units | TY850-3R | |
| 统 系 出 射 | 螺杆直径Screw Diameter | mm | φ42 |
| 射出压力Injection Pressure | Kg/cm2 | 1266 | |
| 理论射出容Theoretical Shot volume | cm3 | 249 | |
| 射出量（P.S)Max. Shot Weight | g/Oz | 222/7.8 | |
| 射出率Injection Rate | cm3/sec | 140 | |
| 射出速度Injection Speed | mm/sec | 100 | |
| 温控区Temperature Control | ZONE | 4 | |
| 料斗容量Material Hoppper Capacity | L | 30 | |
| 统 系 模 锁 | 合模力Clamping Force | T | 85 |
| 开模力Opening Force | T | 17.5 | |
| 模柱间距Distance Between Tie Bare | mm | - | |
| 最小模厚Min Mold Height | mm | 200 | |
| 开模行程Opening Stroke | mm | 250 | |
| 开模距Max. Open Daylight | mm | 450 | |
| 射嘴中心Nozzle Center Height | mm | _ | |
| 射嘴中心距Nozzle Center Distance | mm | _ | |
| 顶出力量Ejector Force | T | 2.3 | |
| 顶出行程Ejector stoke | mm | 70 | |
| 滑 模 系 统 | 滑板尺寸Slide Plater Size | mm | _ |
| 滑板行程Slide Plater Stoke | mm | _ | |
| 圆盘直径Round Set Diamter | mm | φ1000 | |
| 液 统 系 力 电 | 液压Max. Hydaulic Pressure | Kg/cm2 | 140 |
| 作动油量Pump Output | L | 230 | |
| 油泵电机Pump Motor Power | Kw | 11 | |
| 电热容量Barrel Heating Power | Kw | 4.5 | |
| 总用电量Total Wattage | Kw | 15.5 | |
| 其 他 | 机器重量Machine Weight | T | 3.8 |
| 机器外形尺寸Machine Dimensions(LxWxH) | mm | 2.1x1.6x3.1 | |
所有评论仅代表网友意见，与本站立场无关。