技术参数表
| 规格表Specification | ||||
| 型号Model | Units | TYU1200-2R | ||
| 统 系 出 射 | 螺杆直径Screw Diameter | mm | Ф46 | |
| 射出压力Injection Pressure | Kg/cm2 | 2193 | ||
| 理论射出容Theoretical Shot volume | cm3 | 365 | ||
| 射出量（电木)Max. Shot Weight | g/Oz | 403/14.3 | ||
| 射出率Injection Rate | cm3/sec | 117 | ||
| 温控区Temperature Control | ZONE | 4 | ||
| 料斗容量Material Hoppper Capacity | L | 30 | ||
| 统 系 模 锁 | 合模力Clamping Force | T | 120 | |
| 开模力Opening Force | T | 16 | ||
| 容模尺寸Mold dimensions | mm | 600x400 | ||
| 最小模厚Min Mold Height | mm | 250 | ||
| 开模行程Opening Stroke | mm | 400 | ||
| 开模距Max. Open Daylight | mm | 650 | ||
| 顶出力量Ejector Force | T | 4.6 | ||
| 顶出行程Ejector stoke | mm | 75 | ||
| 滑 模 系 统 | 滑板尺寸Slide Plater Size | mm | / | |
| 滑板行程Slide Plater Stoke | mm | / | ||
| 圆盘直径Round Set Diamter | mm | φ1224 | ||
| 液 统 系 力 电 | 液压Max. Hydaulic Pressure | Kg/cm2 | 140 | |
| 作动油量Pump Output | L | 480 | ||
| 油泵电机Pump Motor Power | Kw | 15 | ||
| 电热容量Barrel Heating Power | Kw | 10.4 | ||
| 总用电量Total Wattage | Kw | 25.4 | ||
| 其 它 | 机器重量Machine Weight | T | 7 | |
| 机器外形尺寸Machine Dimensions(LxWxH) | m | 2.3x1.7x3.1 | ||
所有评论仅代表网友意见，与本站立场无关。