DZF1300-E型真空吸附式半自动覆面机当裱贴彩印的面纸较薄并且有卷曲的情况下，机器的速度不可开得过快，装面纸和瓦楞纸板时，它们左右相对的位置要对准，以免因为出纸定位出现偏向误差，产生横向裱贴不准，为了面纸和瓦楞纸板裱贴位置准确无误，机器的生产速度要根据面纸的特点合理掌握；装纸时要将面纸和瓦楞纸板的相对位置对准；上，下链条的行程   准确；上，下纸对准后要将堆纸台的挡纸限位装置固定好。

After aligning with the relatively reasonable grasp the characteristics of production when the adsorption DZF1300-E type vacuum type semi automatic laminator laminating color printing tissues thinner and curly, the machine speed can not drive too fast, the glossy paper and corrugated cardboard, they are about the relative position to be aligned, lest because the paper positioning deviation error, transverse mounted allowed, in order to ensure the glossy paper and corrugated cardboard mounted position is accurate without any error, the machine speed according to the tissues; paper to glossy paper and corrugated cardboard position alignment, the chain of travel must be accurate, the paper to paper pile retaining paper limit device is fixed.

DZF1300-E型真空吸附式半自动覆面机用途与特点：

1、自动送底纸，正面推面纸，具有送纸轻松，降低劳动强度。

2、前规定位底纸超前，适合卡纸与卡纸贴合，卡纸与A、B、C、D、E型瓦楞纸板贴合。

4、底纸、面纸贴合前后可调，轻松对贴。

5、供胶系统由液位继电器自动控制，胶层厚度可调涂胶均匀，节省胶水用量。

6、电机采用无级调速，电磁离合器采用无触点因态继电器，行程位置采用光电开关检测，电子自动计数及空张光电自动控制。

7、贴合精度高，贴合后的成品具有纸面平整，边缘整齐，，刚性好等特点。

8、电厢技术含量高，带有自动计数功能。

9、整体结构紧凑、外形美观、工作

DZF1300-E型真空吸附式半自动覆面机技术参数：