C16-美国 ATI C16便携式气体检测仪、多种气体检测仪-北京杰斯曼科技有限公司

C16便携式气体检测仪

产品名称：C16便携式气体检测仪

C16便携式气体检测仪

Cl6手持式气体检测仪能在现场检测环境空气中的有毒有害气体，可用于应急监测、职业卫生场所有毒有害气体检测、石化企业安全检测以及储运、泄露检测等。

该仪器*出色的特点是它能通过更换相应传感器模块检测多种类型的气体。即不需为每种类型的气体分别购买单独的主机，一台检测仪与不同的传感器结合使用，就能检测超过3 0种不同的气体，传感器可以即插即用，不需再次校准。检测量程可在*大量程和*小量程范围之间任意可调，可以根据检测的需要自由设置量程。

主要特点

可检测多达3 0种有毒有害气体

即插即用，无需标定

检测量程可根据检测需要调整

内置采样泵、外置采样杆

高容量数据采集

RS一2 3 2输出接口

检测器几乎可在任何地方使用

美国 ATI C16便携式气体检测仪、多种气体检测仪

One Gas Detector for Many Gases...

Click Here to Download the Datalog Software for Win7 32/64 Bit

ATI's Series C16 PortaSens II Portable Gas Leak Detector is a versatile tool for performing regular leak checks in gas storage areas, around process equipment and piping, or in confined spaces prior to entry. Designed for easy one-hａnd operation, the gas detector contains an internal sample pump and a flexible sampling wａnd to allow pinpoint location of the source of leakage. A large character display insures that measured values are easily visible, and a back-light for the display insures readability in low or no light conditions.

A unique feature of the C16 gas detector is its ability to measure a variety of different gases by simply inserting the appropriate sensor for that gas. That makes this gas detector capable of measuring over 30 different gases or vapors, reducing the need to purchase individual detectors for each type of gas. The gas sensors for the detector can be changed quickly and easily, and there is no need for calibration when a gas sensor is change is made.

Gas sensors used in the C16 portable gas detector are ATI’s newest miniaturized smart sensor modules. Each sensor module is actually a sensor, amplifier, and memory module in one compact package. Because of this design, sensor modules can be calibrated independently and simply plugged into any detector for immediate use. When installed in a gas detector, calibration data is loaded into the microprocessor so that no adjustments are needed. The result is that a gas detector can, for example, go from phosgene measurement to ammonia measurement in less than one minute.

The C16 PortaSens II is equipped with an RS-232 output which allows stored data to be downloaded to a PC through an interface cable that is supplied with the unit. A software package is included with the unit to facilitate data transfer.