P70/P80/P90/P100/P70G/P80G/P90G/P100G-KDF高温炉-安捷来国际股份（香港）有限公司

KDF高温炉：
P-Series, muffle furnaces

Sufficient programs storable.

Temp. control is done by P.I.D. control and the furnace performs optimum operation without heat overshooting.
The activation of auto tuning enables the furnace to make optimum control even when the temp. range and the volume of heat treatment are varied.
This enables you to operate program of 400 segments and cycle operations for various heat treatment.

**SPECIFICATIONS**
Model	P70	P70G	P80	P80G	P90	P90G	P100	P100G
External dimensions W-H-D (mm)	340 - 380 - 490	380 - 380 - 490	380 - 450 - 540	420 - 450 - 540	490 - 510 - 600	530 - 510 - 600	655 - 770 - 910	695 - 770 - 910
Chamber dimensions W-H-D (mm)	120- 90-220		170-150-260		240-210-295		350-300-500
Chamber capacity	2.4 L		6.6 L		14.9 L		52.5 L
Weight	approx. 20.5kg	approx. 21.5kg	approx. 26.5kg	approx. 27.5kg	approx. 39.0kg	approx. 40.0kg	approx. 124.0kg	approx. 125.0kg
Power requirement	AC100V 50/60Hz		AC200V Single phase 50/60Hz
Power consumption	1.4kW		3.0kW		4.0kW		8.0kW
Ordinary/Max. temp.	1050ºC / 1150ºC						1000ºC/1100ºC
Temp. range	100ºC - 1150ºC						100ºC - 1100ºC
Temp. control unit of measure	0.5ºC
Temp. distribution range	±3ºC at 1000ºC
Muffle wall material	Ceramic fiber
Thermo-couple	JIS - K type
Heating element material	Alloys of Fe, Cr and Al						Kanthal heating element
Exhaust hole diameter	φ23
Safety devices	Cooling fan , Over-current breaker, over-heat temp. set device, rear cover sensor, Micro-computer malfunction detector ( computer failure, heater breakdown, abnormal heat-up, memory failure )
Max. temp. up time	approx.45min. up to 1050ºC/approx. 60 min. up to 1150ºC		approx.15min. up to 1050ºC/approx. 18 min. up to 1150ºC		approx.22min. up to 1050ºC/approx.bout 30 min. up to 1150ºC		approx.33min. up to 1000ºC/approx. 42 min. up to 1100ºC
Gas injection unit	Optional	standard mounting (Nitrogen 2L/min)	Optional	standard mounting (Nitrogen 2L/min)	Optional	standard mounting (Nitrogen 5L/min)	Optional	standard mounting (Nitrogen 20L/min)
Control method	time-sharing P.I.D. control (with auto tuner), P.I.D. constant ... one kind per each pattern
Program stages	40 patterns / 20 segments per pattern
Pattern links	10 kinds of any 20 patterns ( 400 segments max.)
Program item	Temp. up and down time, Temp. set, P.I.D. control combination, Soak stop, Gas flaw command, 3 programmable outputs
Segment input item	0 - 99 hours and 59 min.
Communication rate	1200, 2400, 4800, 9600 bps
External terminal	Thermo-couple terminal for recorder, AC power output terminal for gas injection, Terminal for deodorizer connection, Operation/Stop/Connection output for alarm, 3 kinds of event outputs, Terminal for selection of power failure recovery, Terminal for RS-232C communication.
Chamber atmosphere	Air	Nitrogen, oxygen, Argon, etc.	Air	Nitrogen, oxygen, Argon, etc.	Air	Nitrogen, oxygen, Argon, etc.	Air	Nitrogen, oxygen, Argon, etc.
Accessories	Ceramic plate, Blank plug for exhaust outlet, AC power code ( attached in case 70 series model ), Gas injection unit ( G type only ), Instruction manual, Communication software for sample, User's card.
Optionals
Applied Model	P70	P70G	P80	P80G	P90	P90G	P100	P100G
Gas injection unit	ES7S / ES71S		ES72S
Deodorizer	VF71S		VF72S
Gas injection unit	KDG-70	Built-in	KDG-80	Built-in	KDG-90	Built-in	KDG-100	Built-in
Exclusive stand	KDW-100 / KDW-200						KDW-200
Software for communication	KDM-232