CF700P-冷却水循环装置-安捷来国际股份（香港）有限公司

冷却水循环装置:

Aspirator,Cooling

CF700P

WorkingTemperature

-20 to Roomtemp.

Temp. AdjustmentAccuracy

±2°C

CoolingCapacity

430kcal

(at liquid temperature-10°C)

Water pump with high accuracy,decompression and refrigeration can be done simultaneously.

Model CF700P cooling aspirator isa water-jet pump which can perform decompression and cooling at thesame time. This aspirator can dispose the aspirated drainage whichincludes dichloromethane, benzer, etc. in the rotary evaporatorwithout discharging the drainage into the outside of theaspirator.

CF700P

Specifications

Model	CF700P
Circulation type	Closed circulation type
Aspiration/Circulation method	Aspiration tank and coolingwater circulation tank
Waste water removemethod	Natural drain with siphon orbatch treatment detaching aspiration bath
Performance
WorkingTemperature	-20 to Room temp.
Temp. AdjustmentAccuracy	±2°C
Cooling Capacity	Approx. 1,200W (1,030kcal) at liquid temperature 10°C Approx. 950W (820kcal) at liquid temperature 0°C Approx. 500W (430kcal) at liquid temperature -10°C
Components
Temp. controlsystem	ON/OFF control ofrefrigerator
Temp. Sensor	T-thermocouple (with stainlessprotection tube)
Temp.Setting/Display	Digital setting/Digitaldisplay
Refrigeratorcompressor	Air cooling, 600W
Refrigerator coolingmedium	R404A
Circulation Pump (50/60Hz)	Magnetic pump, Max. flow rate: Approx. 13.5/15.5L/min. Max. head:10.0/13.5m
Cooling coil	Copper withnickel-plated
Circulation Port	O.D. 11.0mm hose nipple (INａnd OUT)
Usable ambienttemperature	5 to 35°C
SafeDevice
Safetycountermeasures	Electric leakage breaker, Refrigerator overload relay, Pumps thermal protector, Delay timer for protecting refrigerator
Other Function
Flexible discharge port/Nipple forreturn port/Pre-filter for refrigerator/ Over flow for drain/Waterlevel gauge
Standard
Dimensions of Innertank	I.D.300×H235mm
Inner tankmaterial	Stainless steel
Inner tankcapacity	Approx. 16L(Liquidcapacity:14L)
Externaldimensions	350×480×1,007(W×D×Hmm)
Power source50/60Hz	AC100V/220V, single phase 15A/6.9A
Weight	Approx. 71 kg
Accessories
Circulation hose withwire clamp	I.D. φ9mm×length 1.5m (material ; ERP) (2 pcs.)
Drain hose (siliconrubber)	I.D. φ9mm×length 0.8m (1pc.)
Cap for overflow	I.D. φ9mm×length 0.8m(1pc.)
Rubber cap for airin-take port	I.D. φ9mm×length 0.8m(2pcs.)
Vacuum hose	I.D. φ6mm×length 2m (1pc.)
OptionalAccessories
Vacuum regulator with pressure gauge/ flow volume controller / Heat insulationhose