YYA-750-1200/YYA-900-1200-日本YAMATO高压脱泡机-安捷来国际股份（香港）有限公司

日本YAMATO高压脱泡机

YYA-750-1200/YYA-900-1200

高压脱泡机是用在液晶显示器生产线上，偏光器校正过程之后，除去液晶板中气泡的机器。本机为B型的高压脱泡机。
温度、气压和操作时间等操作形式可以设定。
舱体是由SUS304防锈材料构成。

性能特点：

防过载
温度分布十分均匀
三种操作方法
1. 先加压，再升温
2. 压强和温度同时升高
3. 先升温，再加压
可以调整排气速度
可以调整升温速度
舱体空间可由用户选择

■数据式样

型号	YYA－750－1200	YYA-900-1200
舱体
内部空间	φ750*1200Lmm	φ900*1200Lmm
压力	抗压：0.9Mpa水测试压力：1.35Mpa
温度范围	上限温度：70℃
温度均度	在50℃时，小于±3℃
舱门
类型	单边垂直自动滑门
开/关系统	油压泵垂直滑动系统，加装增压空气排出装置
控制面板
压力系统	装有压力控制器、调整器和螺旋阀门
加热系统	带PID控制的加热器
搅拌系统	西罗克风扇带动的搅拌方式（轴的密封布无需水冷）
压力表	带上限的压力表压力范围：0–1.0Mpa精度：±1%
温度控制器	数字设定，数字显示（PID控制）
压力控制器	数字设定，数字显示（开/关控制）
系统控制	程序化
工作计时器	99个小时59分钟
紧急停止开关	蘑菇型开关
安全性
门开/关	显示灯（门的状态由一套限位开关和近控开关控制）
压力显著增加	压力达到上，过压警灯点亮，蜂鸣器发声，安全阀开启减压，加热器停止运行
过热	由温度控制器监控
必须设备
电源	AC200/220/380V,三相50/60Hz,15kva	AC200/220/380V,三相50/60Hz,15kva
外形尺寸	1500(w)1700(d)1750(h)mm	1650(w)1700(d)1900(h)mm
货架数	定制
货架斜度	定制
重量	大约1200公斤	大约1500公斤

Autoclavefordispersing (purging) airbubbleLCD

YYK-750S/900S

Model
750	900
OperatingTemperature Range
Max. 70°C
Pressure-Resistant
0.9Mpa
InnerDimension
φ750×850mm	φ900×900mm

Equipment Summary

This autoclave disperses(purges) airbubblesincell panels after polarizer aligning process in LCDproductline.The system is Bach-type autoclave.
Operation conditions such as temperature, air pressureandprocesstime are changeable.
The chamber is made of for rust protection.

Feature

No overshooting by any method operation
Can get perfect uniformityFull loadsample---+/-1.5 degree C (15 points temperature measurement)
Three kinds of method

At first pressure raise, afterthatTemperatureraise
At the same time pressureandTemperatureraise
At first Temperature raise, afterthatPressureraise

Can adjustable exhaust speed
Can adjust ramping temperature
Special Trolley and Rack available
Any chamber size is availableuponcustomer'srequirement (from 350 up to 1800mm I.D.)
Also any chamber depth isavailableuponcustomer’s requirement.

Control Panel

Specifications

Model	YYA-750-1200	YYA-900-1200
DrumChamber
Innerdimension (Effective inside dimensions)	φ750×1200 L mm	φ900×1200 L mm
Pressure	Pressure-resistant: 0.9 Mpa Hydraulic test pressure : 1.35Mpa
Temperaturerange	Max.Operatingtemperature : 70°C
Temperatureuniformity	Less than ±3°Cat50°C (with Sample Load)
Door
Type	Single-sidedvertical slide Auto door type
Opening/Closingsystem	Thevertical slide system in an oil pressure cylinder. Packing pressurization air extrusion.
ControlPanel
Pressurizingsystem	Controlledwithpressure controller, regulators and solenoidvalves
Heatingsystem	SheathheaterwithPID control, Side flow method.
Stirringsystem	Agitationmethodbysirocco Fan (Water-Cooling is not required forshaftsealingsection) Free-maintenance
Pressuregauge	Analogpressuregauge with upper limit contact Pressure range : 0 to 1.0MPa Accuracy : ±1%
Temperaturecontroller	Digitalsetting,digital indication (PID control)
Pressurecontroller	Digitalsetting,digital indication (ON/OFF control)
Systemcontrol	ControlledbyProgrammable controller (PLC)
Workinghourtimer	99hours59min(arbitrarity set)
Emergencystopswitch	Mushroomtypelockswitch
Safety
Safetymechanism (Dooropening/closing)	Doorindicatorlamps(Door position is detected by 1 set of limit switchａnd 1 setofproximity switch)
Safetymechanism (Pressure excessive rise)	Upperlimitalarmcontact of pressure gauge with upper-limit contactisconnected ,ａnd safety valve blows off pressurized air.(Overpressure lamplights and buzzer sounds. Heater is turn offandpressurized air isautomatically exhausted.)
Safetymechanism (overheat)	Detectedbyupperlimit alarm output of temperature controller. (Over pressure lamp lights and buzzer sounds. Heater is turnoffandpressurized air is automatically exhausted.)
RequiredUtility
Powersupply	AC200/220/380V,3-phase50/60Hz15 KVA	AC200/220/380V,3-phase50/60Hz15 KVA
Externaldimensions	1,500(W)×1,700(D)×1,750(H)mm	1,650(W)×1,700(D)×1,900(H)mm
Shelfreststepnumber	Custommade(Trolleyａnd Rack)
Shelfrestpitch	Custom made
Weight	Approx. 1200 kg	Approx.1500kg