技术参数
| 型号 Model | Unit | KS-85T-C | KS-85T-C-D(单滑） | KS-85T-C-DM(双滑) | |||||||||
| injection system | 射出系统 | 螺杆直径 Screw Diameter | mm | 42 | 45 | 50 | 42 | 45 | 50 | 42 | 45 | 50 | |
| 射出压力Injection Pressure | Kg/cm² | 1964 | 1711 | 1386 | 1964 | 1711 | 1386 | 1964 | 1711 | 1386 | |||
| 理论射出容量Theoretical Shot Volume | cm³ | 277 | 318 | 392 | 277 | 318 | 392 | 277 | 318 | 392 | |||
| 射出量 Max.shot Weight(ps) | g | 256 | 294 | 362 | 256 | 294 | 362 | 256 | 294 | 362 | |||
| oz | 9.0 | 10.4 | 12.8 | 9.0 | 10.4 | 12.8 | 9.0 | 10.4 | 12.8 | ||||
| 射出速度 Injection speed | mm/s | 116 | 116 | 116 | |||||||||
| 射出速率 Injection Rate | cm³/s | 161 | 184 | 228 | 161 | 184 | 228 | 161 | 184 | 228 | |||
| 螺杆转速 Screw Speed Rotation | r.p.m | 320 | 320 | 320 | |||||||||
| 射嘴中心高度 | mm | 110～200 | 110～200 | 110～200 | |||||||||
| 温度控制段数 Number of Temperature Control | Zone | 4 | 4 | 4 | |||||||||
| Clamping system | 锁模系统 | 锁模力 Clamping Force | Tons | 85 | 85 | 85 | |||||||
| 开模力 Opening Force | Tons | 12 | 12 | 12 | |||||||||
| 模板尺寸 Platen Size | mm | 630*335 | / | / | |||||||||
| 滑板尺寸 Slide Size | mm | / | 630*335 | 1300*450 | |||||||||
| 滑模行程 Slide table stroke | mm | / | 600 | 600 | |||||||||
| 最小模厚 Min.Mold Height | mm | 200 | 200 | 200 | |||||||||
| 容模尺寸（L×W）Max.Mold Size | mm | 520*280 | 520*280 | 520*280 | |||||||||
| 开模行程 Oprening Stroke | mm | 300 | 300 | 300 | |||||||||
| 顶出力量 Ejector Force | Tons | 1.2 | 1.2 | 1.2 | |||||||||
| 顶出行程 Ejector Stroke | mm | 105 | 85 | 85 | |||||||||
| Electric system and otherw | 电力及其它 | 液压压力 Max.Hydaulic Pressure | Kg/cm² | 140 | 140 | 140 | |||||||
| 电机电力 Pump Motor Power | kw/HP | 18.5/25 | 18.5/25 | 18.5/25 | |||||||||
| 电热容量 Barrel Heating Power | kw | 7.6 | 7.6 | 7.6 | |||||||||
| 机器重量 Machine Weight | Tons | 4 | 4.2 | 4.5 | |||||||||
| 机器外型尺寸Machine Dimensions(L×W×H) | m | 3.2*1.2*2.3 | 3.2*1.8*2.3 | 3.2*2.4*2.3 | |||||||||
| 注:本参数按聚苯乙烯比重1.05,注射系数取0.88计算。如有设计更改，恕不另行通知。 Note: this parameter according to the proportion of polystyrene is 1.05, the injection coefficient of 0.88. If there are any design change, without prior notice. | |||||||||||||
所有评论仅代表网友意见，与本站立场无关。