0.25T并联中频炉主要用途
0.25T并联中频熔炼炉主要应用于钢，铁，铜，铝和合金，具有熔炼效率高，节能效果，金属成分均匀，燃烧量小，升温快，温度控制容易等特点。各种金属熔体。
并联中频炉的负载电路对电源呈现高阻抗，要求由电流源供电，需在直流电源末端串接大电杭器。但在逆变失败时，由于电流受大电抗限制，冲击不大，较易保护。
并联中频炉是恒流源供电，为避免滤波电抗I.d上产生大的惑生电势，电流必须连续。也就是说，必须保证逆变器上、下桥臂晶闸管在换流时，是先开通后关断，也即在换流期间（t）内所有晶闸管都处于导通状态。这时，虽然逆变桥臂直通，由于L足够大，也不会造成直流电源短路，但换流时间长，会使系统效率降低，因而需缩短t，即减小Lk值。
并联中频炉的工作频率必须略高于负载电路的固有振荡频率，以确保有合适的反压时问t，否则会导致晶闸管间换流失败；但着高得太多，则在换流时晶闸管承受的反向电压会太高，这是不允许的。
0.25T并联中频炉包括：
200kw中频并联功率-铝炉体外壳-液压站-遥控箱ZXZ-20T闭环冷却塔。
0.25T并联中频炉价格
0.25T并联中频炉的价格是根据中频电源的功率和炉体的体积来计算的。不同的配置价格各不相同。此价格仅供参考。与我们联系会有很低的价格，请咨询具体价格。
| 设备名称 | 总价（元） |
| 0.25T并联中频炉 | ¥70000元 |
0.25T并联中频炉配置
| 项目名称 | 规格型号 |
| 200kw并联中频电源 | KGPS- 200kw / 0.25吨 |
| 铝炉壳 | 毛重-0.25T |
| 水冷电缆 | LHSGM - 240平方 |
| 遥控器盒 | T |
0.25T并联中频炉电源，吨位，功耗的选择方法。
| SGM BL -250千瓦 | 铝壳 |
| 设备额定功率 | 200千瓦 |
| 相电压 | 3 * 380V |
| 电炉额定电压 | 750伏 |
| 熔化速度 | 约0.25T / H |
| 额定容量 | 0.25吨 |
| 额定温度 | 1700°摄氏度 |
| 并联中频电源 | 三相六脉冲整流 |
| 功率因数 | ≥0.92 |
| 倾斜方式： | 减速器 |
| 带有电源规格 | KGPS-1 / 200千瓦 |
| 补偿电容柜 | 组 |
| 火炉 | 铝壳炉 |
| 减速器 | 一种 |
| 水冷电缆 | 二 |
| 蜕膜 | 一 |
5、0.25T并联中频炉电路图：
0.25T Parallel Intermediate Frequency Furnace
Author：admin time：2019-10-12 20:55
1 , the main purpose of 0.25T parallel intermediate frequency furnace
0.25T parallel IF melting furnace is mainly applied to steel, iron, copper, aluminum and alloys, having a high melting efficiency, energy-saving effect, a uniform metal composition, burning small, quick temperature rise, easy temperature control and so, for various metal melt.
2 , 0.25T parallel intermediate frequency furnace consists of:
Parallel Power 200kw IF - aluminum furnace body shell - hydraulic station - remote control box ZXZ- 20T closed loop cooling tower.
3 , 0.25T parallel intermediate frequency furnace price
The price of the 0.25T parallel intermediate frequency furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. Contact us will have a very low price, please consult the specific price.
| Device name | Total price (yuan) |
| 0.25T parallel intermediate frequency furnace | ¥ 70000 Yuan |
0.25T parallel intermediate frequency furnace configuration
| Item name | Specification model |
| 200kw parallel intermediate frequency power supply | KGPS- 200kw / 0.25T |
| Aluminum furnace shell | GW- 0.25T |
| Water cooled cable | LHSGM - 240 square |
| Remote control box | H T -YK |
4 , 0.25T parallel intermediate frequency furnace power supply , tonnage , power consumption selection method .
| SGM BL -250 kw | Aluminum shell body |
| Equipment rated power | 200kw |
| Phase voltage | 3* 380V |
| Electric furnace rated voltage | 750 V |
| Melting rate | About 0.25T / H |
| Rated Capacity | 0.25T |
| Rated temperature | 1700 °C |
| Parallel intermediate frequency power supply | 3- phase 6- pulse rectification |
| Power factor | ≥0.9 2 |
| Tilting method: | Reducer |
| With power supply specifications | KGPS-1/ 200kw |
| Compensation capacitor cabinet | set |
| stove | Aluminum shell furnace |
| Reducer | A |
| Water cooled cable | Two |
| Decidua | One |
5 , 0.25T parallel intermediate frequency furnace circuit diagram :
所有评论仅代表网友意见，与本站立场无关。