双室油淬加压气冷真空炉的具有油淬和气淬烧结，退火等功能，通用性好。双室油淬加压气冷真空炉具有高效,节能,温度控制精准,温度均匀性好。

冷室与热室之间设有气动真空复合闸阀，具有良好的隔热、隔气效果。 。油淬采用油搅拌装置使淬火油活动方向更公道，确保工件变型量小。 气冷采用喷射式冷却结构，使高压气流方向更公道，快速，平均。 冷室采用气动锁圈密封结构，带有机电互锁装置，安全可靠。

主要用于合金钢、合金结构钢、工模具钢、弹簧钢、轴承钢、不锈钢、精密合金钢等材料的光亮淬火、调质及磁性材料的烧结,光亮退火及真空钎焊。

电炉名称：双室油淬加压气冷真空炉

Furnace Name: Double chamber oil quenching pressurized gas cooled vacuum furnace

用途Application: ：

主要用于合金钢、合金结构钢、工模具钢、弹簧钢、轴承钢、不锈钢、精密合金钢等材料的光亮淬火、调质及磁性材料的烧结，光亮退火及真空钎焊

It is mainly used for bright quenching, quenching and tempering of alloy steel, alloy structure steel, die steel, spring steel, bearing steel, stainless steel, precision alloy steel, sintering, bright annealing and vacuum brazing of alloy steel, alloy structure steel, die steel, spring steel, bearing steel, stainless steel, precision alloy steel, etc、

特点 /characteristic：

1、加热元件沿加热室圆周360度均匀布置，温度均匀性达±5℃

The heating element is uniformly arranged along the circumference of the heating chamber by 360 degrees, and the temperature uniformity is up to about 5 degrees ℃、

2、加热室和油淬室分开，可连续生产

The heating chamber and the oil quenching chamber are separated and can be produced continuously、。

3、油搅拌机构变频调速且带有导流装置，冷却均匀性好、工件变形小

Oil mixing mechanism variable frequency speed regulation with flow guide, good cooling uniformity, small workpiece deformation、

4、 具有恒温淬火/等温淬火/对流加热/真空分压

Constant temperature quenching/ austempering/ convection heating/ vacuum partial pressure

5、 机械动作稳定，承载量重，料车自动运行

The mechanical action is stable, the bearing capacity is heavy, and the material vehicle runs automatically、

6、 全智能化工业计算机控制系统并有一套手动操作系统

Fully intelligent chemical industry computer control system and a manual operating system。

7、操作简洁 编程工艺灵活输入 机械动作稳定可靠

The operation is simple and the programming process is flexible and the mechanical action is stable and reliable、

8、手动/半自动/自动 故障自动报警/显示

Manual/ semi-automatic/ automatic fault automatic alarm/ display

配置选择/Configure select:

产品 规格/ Specifications：

注：特殊规格要求可根据客户要求定制

Note: Special specification requirements can be customized according to customer requirements

以下参数可根据工艺要求调整，不作为验收依据，具体以技术方案和协议为准

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement