专为移除SO3气溶胶而设计
博纯Baldwin™系列除气溶胶系统是专为相对高SO3含量(>10ppm)的气体采样应用设计的。除SO3 气溶胶系列配备特殊的定时电路，精确地热交换器会交替冻结和解冻。在经过主动热交换器解冻之前，交替的主动热交换器冷却至-7℃确保不间断的运行且无SO3逸出。这个零下温度形成了薄冰层从采样气体中捕获并除去SO3气溶胶。
Baldwin 10410 系列除SO3冷凝器运行：
采样冷却器左边的两个热交换器是串联的。采样气体首先流经用来除去大量水分的被动交换器。然后再进入一个主动热交换器。从热交换器出口 Dew Point 控制在+4℃，这样减少的水分含量不到1%。气体采样随后流经气体采样泵，在那被交替的送往Kynar®热交换器（在冷却器的右边）冷冻，然后到三路Teflon®电磁控制阀，zui后进入剩余气体采样系统。一个的蠕动蠕动排水泵头将冷凝水从每个换热器内排出。
Baldwin 10410 系列除SO3冷凝器特点：
- 5-10 LPM – 10.6-21 SCFH
- 交互式通道（预设置程序）
- 2 x 10” Durinert® (惰性涂层不锈钢)热交换器串联（主动/被动）
- 2 x 10” Kynar热交换器组合 （主动/被动）
- 3 LCD 显示 w/ 相关 LED 指示器
- 100-120 VAC/ or 200-240 VAC, 50/60 Hz voltages
- 14.5″ x 12.75″ x 12.25″; 35 lbs
- (2) 双蠕动排除泵
10410 系列冷凝器规格：
样气流速范围 5-10 LPM – 10.6-21 SCFH 在额定流量平均进口露点 175°F @ 43% H2O, 78°C 尺寸 14.55 x 12.62 x 12.32 in. HWD – 37.0 x 32.1 x 29.5 cm 重量 35 lbs – 15.9 kg zui大入口样气温度 400°F (205°C) SS, Glass, Durinert® 280°F (138°C) Kynar Impinger zui大入口压力 45 psig – 3 bar / 2250 mmHg zui大热交换器压降 <+1 in. H2O 环境温度范围 33-104°F – 0.56-40°C 出口样气露点 19.4°F (-7°C) 入口管件连接 ⅜ in. FNPT 出口管件连接 ¼ in. FNPT 排出管件接头 ⅜ in. FNPT 压力 110 (220 optional) VAC – 50/60 Hz 电力 740W 10410 系列冷凝器智能产品编号系统：
1 – 电压 115 VAC, 50/60 Hz 1A 230 VAC, 50 Hz 2A 2 – 系统安装配置 Rack mount, u-bracket, 19″x21″ RM Wall mount, flat plate, 19.25″x18.75″ WM 3 – 报警继电器板 Alarm relay board – single channel AR 4 – Water Slip取水样传感器 Water slip sensor with inline holder and 18″ lead with male connector; requires option 3 WS 5 – 除酸器 Acid safety scrubber kit, glass with marble chips AS 备件：
ITEM # 描述 3CXG-002 Impinger, 10″ glass, threaded with fittings 3CXK-005 Impinger, 10″ Kynar, aerosol packed 0PTC-003 Paste,Thermal,Compound,2 Oz.Tube 3CCB-009E Control board 3CCB-020A Temperature display board 3CCB-018 Relay board 1PSD-035 Power supply, 600 W, 15VDC 1TTC-003 Thermocouple, temperature control, type K, 36″ 2FAN-005 Fan, muffin, 4″ x 1″, 12VDC 2FAN-007 Fan, muffin, 6″ x 1-1/2″, 120VAC 3KPE-004 Peltier element kit, 40 mm, single TE 3CWS-001 Water slip sensor only with 18″ lead and male connector 2VS3-001 Valve, solenoid, 3-way, 120V/60Hz 2VS3-006 Valve, solenoid, 3-way, 230V/50Hz 3KFA-001 Complete sample in-line filter assembly, 2-micron 3FET-002 Filter element, Teflon, 2-micron 3FHG-001 Filter bowl, glass 3FEC-002 Filter element, ceramic, 2-micron 3KPB-003 Peristaltic pump, dual head, 115 VAC, complete with enclosure 3KPB-004 Peristaltic pump, dual head, 230 VAC, complete with enclosure 3KPB-000 Pump Peristaltic, No Heads 3KPB-000 Pump Peristaltic, No Heads 2PBM-001 Peristaltic pump, motor only, 115 VAC 60 Hz 2PBM-002 Peristaltic pump, motor only, 230 VAC 50 Hz 2PBM-003 Peristaltic pump, head only, standard 2PBT-002PK Peristaltic pump, tubing, Norprene, size 17 (10 feet) 2PBM-006 Dual head hardware kit 2PAM-002 Sample pump repair kit, dual head 2PAM-001 Sample pump repair kit, single head 2VRS-005 Valve,Check,316SS,1/4″T,10 Psig,Poppet 3SCR-004 SO3 safety scrubber 3KMC-001 SO3 safety scrubber replaent marble chips 2PAM-016 Pump,Kit,Rebuild,Single,Includes:Valve - 样气流量计，无阀
- 样气泵，单头止回阀，碳填充Teflon。
- 过滤器组件 w/2微米陶瓷元件, 玻璃过滤器和支撑架
- 可选项: 除酸器元件(型号. 3SCR-004);取水样传感器w/支架组件 (型号. 3KCW-002) 注释: 取水样传感器需要3CCB-018 报警板.
所有评论仅代表网友意见，与本站立场无关。