Baldwin 5210-Baldwin 5210 经典系列热电采样冷凝器-北京谱飞科技有限公司

博纯公司的Baldwin-Series Classic 系列5210型热电冷凝器专门设计用于高室温及高湿度应用，同时适用于单气路或双气路应用。5210型产品具有特大号的散热片及高性能热电装置，能够实现大量排热的效果。Baldwin-系列热电冷凝器所采用的散热片均由传热系数较高的挤出铝板（端面厚度3/4英寸）制成。5210型产品采用一种特殊的控制器，可以在高达110°F (43°C)室温环境下工作。
Baldwin 5210 经典系列热电采样冷凝器性能:
3-8 lpm (6.4-17scfh); 440 Btu/Hr
单通道系统
(1) 主动式, (1) 被动式热交换器, 仅在10″长度的系列中 (下方选择材料)
LED温度显示
100-120 VAC/ or 200-240 VAC, 50/60 Hz voltages
14.6″ x 11″ x 10.6″; 27 lbs
需要双头蠕动泵排水泵，但未包含
水滑和报警继电器板
CE 认证

样气流量范围	Up to 8 LPM Up to 17 SCFH
额定流量条件下的平均入口露点	20% H2O (60°C DP) @ 5 LPM
尺寸	14.55 x 11.12 x 10.57 in. HWD – 37 x 28 x 26.5 cm
重量	27 lbs – 12 kg
zui大入口样气温度	400°F (205°C) SS, glass impingers 280°F (138°C) Kynar impingers
zui大入口压力	15 psig – 1 bar
zui大热交换器压降	+1 in H2O
室温范围	33-110°F – 0.6-43°C
出口样气露点	41°F – 5°C
入口管连接	3/8 in. compression
出口管连接	1/4 in. compression
排水管连接	1/4 in. barb
电压	115/230 VAC – 50/60 Hz
电源功率	250 Watts
开始时间	小于 3 minutes

Baldwin 5210 经典系列热电采样冷凝器

智能产品编号系统：

part-numbers-baldwin-5210-Series

1 – 电压
115 VAC, 50/60 Hz	1A
230 VAC, 50 Hz	2A
2 – 热交换器 (要求选项)
(2) 10″ Stainless Steel, EZ Clean Twist-Apart Impingers	ES
(2) 10″ Glass Impingers, threaded with fittings	G
(2) 10″ Kynar Impingers	K
(2) 10″ Stainless-Durinert coated, EZ Clean Twist-Apart Impingers	ED

3 – NJ 热电偶
仅不锈钢热交换器
New Jersey thermocouple temperature sensor; lead wires only	NJ
4- 水滑传感器
Water slip sensor with inline flow holder; 1/4″ Kynar tube fittings	WS

ITEM #	描述
3KPB-003	Peristaltic pump, dual head, 115 VAC, complete with enclosure
3KPB-004	Peristaltic pump, dual head, 230 VAC, complete with enclosure

ITEM #	描述
3KPB-000	Pump Peristaltic, No Heads
2PBM-001	Peristaltic pump, motor only, 115 VAC 60 Hz
2PBM-002	Peristaltic pump, motor only, 230 VAC 50 Hz
2PBM-003	Peristaltic pump, head only, standard
2PBT-002PK	Peristaltic pump, tubing, norprene, size 17 (10 feet)
2PBM-006	Dual head hardware kit
3CXD-022	Impinger, 10″ EZ-Clean twist-apart, SS Durinert+ coated
3CXD-024	Impinger, 10″ NJ, EZ-Clean twist-apart, SS Durinert+ coated
3CXG-002	Impinger, 10″ glass, threaded with fittings
3CXK-003	Impinger, 10″ Kynar
3CXS-022	Impinger, 10″ SS, EZ-Clean twist-apart
3CXS-024	Impinger, 10″ NJ, EZ-Clean twist-apart, SS
0PTC-003	Paste,Thermal,Compound,2 Oz.Tube
3CCB-010	Control board, single channel
3CCB-004	Relay board, single channel
1PSD-035	Power supply, 600 W, 15VDC
2FAN-005	Fan, muffin, 4″ x 1″, 12VDC
2FAN-004	Fan, muffin, 4″ x 1-1/2″, 12VDC
3KPE-004	Peltier element kit, 40 mm, single TE
1TTC-001	Thermocouple, temperature control, type K, 24″
3CWS-001	Water slip sensor only with 18″ lead and male connector
3KCW-002	Water Slip Sensor w/conn.
0PTC-003	Paste,Thermal,Compound,2 Oz.Tube
4C-NJ/K	NJ Thermocouple Retrofit; for 1 Impinger