CF35.UL.500.03.O.PE-名副其实的电缆CF35.UL.500.03.O.PE德国科隆igus易格斯工程动力电缆-北京精益福泰恩泽贸易有限公司

进口高柔性电缆CF35.UL.500.03.O.PE德国易格斯igus工程动力电缆

北京精益福泰机电机械有限公司塑料电缆拖链轴承

导体：<10mm²：高抗弯强度的精细裸铜多股线

≥10mm²：细铜线先编织成束然后绞在一起

名副其实的电缆CF35.UL.500.03.O.PE德国科隆igus易格斯工程动力电缆-值得拥有

Robust in rough environment

Servicing: Highly flexible cables raise machine availability in the furniture industry.

In the ADA furniture factory, there are many things that move: disk sawing machines, bearings, material cutting machines and many more. The motor and control cables used here have to be pretty much resistant and flexible in a fourteen-hour work a day. Requirements that are ideally fulfilled by the flexible igus® "Chainflex®" cable range specially made for energy chains.

名副其实的电缆CF35.UL.500.03.O.PE德国科隆igus易格斯工程动力电缆-值得拥有

CF35.UL.05.04 芯数及截面积：(4G0.5)C zui大外径：8.0mm 铜含量：39kg/km 重量：81kg/km

CF35.UL.07.04 芯数及截面积：(4G0.75)C zui大外径：8.5mm 铜含量：52kg/km 重量：104kg/km

CF35.UL.15.04 芯数及截面积：(4G1.5)C zui大外径：9.5mm 铜含量：85kg/km 重量：149kg/km

CF35.UL.25.04 芯数及截面积：(4G2.5)C zui大外径：11.5mm 铜含量：128kg/km 重量：207kg/km

CF35.UL.40.04 芯数及截面积：(4G4.0)C zui大外径：13.5mm 铜含量：201kg/km 重量：326kg/km

CF35.UL.60.04 芯数及截面积：(4G6.0)C zui大外径：16.0mm 铜含量：298kg/km 重量：450kg/km

CF35.UL.100.04 芯数及截面积：(4G10.0)C zui大外径：19.5mm 铜含量：454kg/km 重量：682kg/km

CF35.UL.160.04 芯数及截面积：(4G16.0)C zui大外径：23.0mm 铜含量：723kg/km 重量：1003kg/km

CF35.UL.250.04 芯数及截面积：(4G25.0)C zui大外径：27.5mm 铜含量：1160kg/km 重量：1524kg/km

CF35.UL.60.03.O.PE 芯数及截面积：(3X6.0)C zui大外径：14.5mm 铜含量：231kg/km 重量：367kg/km

CF35.UL.100.03.O.PE 芯数及截面积：(3X10.0)C zui大外径：17.5mm 铜含量：356kg/km 重量：568kg/km

CF35.UL.160.03.O.PE 芯数及截面积：(3X16.0)C zui大外径：21.0mm 铜含量：553kg/km 重量：789kg/km

CF35.UL.250.03.O.PE 芯数及截面积：(3X25.0)C zui大外径：24.5mm 铜含量：884kg/km 重量：1208kg/km

CF35.UL.350.03.O.PE 芯数及截面积：(3X35.0)C zui大外径：28.5mm 铜含量：1200kg/km 重量：1675kg/km

CF35.UL.500.03.O.PE 芯数及截面积：(3X50.0)C zui大外径：33.5mm 铜含量：1660kg/km 重量：2283kg/km

德国进口工程塑料电缆igus易格斯动力电缆

CF35.UL.500.03.O.PE 数据：3X50.0mm² 芯数1：U/L1/C/L+ 芯数2：V/L2 芯数3：W/L3/D/L- 芯数4：4/N

-值得拥有

A leather cutting station of American origin had the ADA's technical department pretty much in sweat for several years. "There were problems with the machine right from the start. I've never seen in my whole life such cables, how they were integrated there. We had to replace the cables every two months," reminisces Johann Doler, technical director, about the station with a shudder, which had brought him much worry and work. A cable replacement meant a time wastage of up to one day: "Detect the failure, pull out the cable, put them back in - which moreover was not so simple at all, because the cable must pass through not only the energy chain but in some duct or the other of the machine," says the ADA technician.

-值得拥有