WL1814-L卧式综合加工中心机-森野精机（无锡）有限公司

机台特性

● X, Y轴采用55mm导轨设计，Z轴采用矩形轨设计。以提高机床刚性。
● Z轴双油缸配重设计，以减小主轴箱惯性，提高响应速度，以实现高精度加工。
● 三轴丝杆预拉伸，以减小热延伸，提高机床精度。
● 主轴采用BT40和BT50设计，为客户提供多种模式选择。
● 主轴提供皮带主轴，直连主轴。ZF齿轮传动和全齿轮传动增加主轴扭矩。
● 主结构件经过有限元分析设计，展现的结构稳定性与精度。

● X,Y axis adopts 55mm rail design, Z axis adopts rectangular rail design. To improve the rigidity of the machine tool.
● The Z-axis dual-cylinder counterweight design reduces the inertia of the spindle box and improves the response speed to achieve high-precision machining.
● The three-axis screw rod is pre-stretched to reduce thermal extension and improve the accuracy of the machine tool.
● The spindle adopts BT40 and BT50 design, providing customers with multiple model options.
● The main shaft provides a belt main shaft, which is directly connected to the main shaft. ZF gear drive and full gear drive increase main shaft torque.
● The main structural parts are designed through finite element analysis to show the best structural stability and accuracy.

机械规格表

标准附件

● 皮带头(BT40)10000rpm主轴
● 24支刀A.T.C(刀臂式)
● 水机
● 全密式护罩
● 工作灯
● 润滑系统
● 操作指示灯
● 主轴环状吹气(皮带式)
● 工具及工具箱

● 后方切屑冲洗装置
● 工作清洁枪
● 水枪
● 水平调整块及调平螺丝
● 电气箱热交换器
● 切削吹屑装置
● 主轴油温冷却装置
● 操作说明书含零件表
● 主轴4孔喷水(皮带式)

● Belt head (BT40) 10000rpm spindle
● 24 knives A.T.C (knife arm type)
● waterplane
● Fully enclosed shield
● working lamp
● Central Lubrication System
● Operation indicator
● Spindle ring blowing (belt type)
● Tools and Toolbox

● Rear chip washing device
● Working cleaning gun
● water gun
● Level adjustment block and leveling screw
● Electric box heat exchanger
● Chip blowing device
● Spindle oil temperature cooling device
● Operating instructions with parts list
● Spindle 4-hole water spray (belt type)

特别附件

● BBT-50拉刀螺丝
● 皮带式8000rpm主轴
● 直联式主轴12000/15000rpm
● 20bar高压主轴出水装置
● 32支刀刀臂式

● 油雾回收装置

● 四轴/五轴旋转工作台全套
● 自动关机装置
● 自动刀长量测
● 油水分离机
● 履带式切屑排除器
● 油雾回收装置

● BBT-50 broach screw
● Belt type 8000rpm spindle
● Direct-coupled spindle 12000/15000rpm
● 20bar high pressure spindle
● water outlet
● 32 knife arm type

● Complete set of four/five-axis rotary table
● Automatic shutdown device
● Automatic tool length measurement
● Oil-water separator
● Crawler chip remover
● Oil mist recovery device