Amonics高功率光纤放大器EDFA系列提供0.5W ~ 20W饱和输出功率。是带钥匙开关的台式机，可在采用标准台式或机架外壳封装。
前面板包括液晶显示器、按键开关、电源调节控制旋钮、光纤输入输出适配器等。提供RS232计算机接口进行控制和监控。该EDFA非常适合科学研究、电信、光纤传感和有线电视应用领域的系统传输、研发和测试。
High Power EDFA Datasheet.pdf
Benchtop High Power EDFA Specifications
| AEDFA-27-B | AEDFA-30-B | AEDFA-33-B | |
|---|---|---|---|
| Saturation Output Power (at 0dBm input signal) | Min. +27dBm | Min. +30dBm | Min. +33dBm |
| Input Signal Level | -6 to +3dBm | -6 to +3dBm | -6 to +3dBm |
| Noise Figure () (at 0dBm input signal) | Typ. 5.5dB | Typ. 6.0dB | Typ. 6.0dB |
| Operating Wavelength | 1535nm to 1565nm | 1540nm to 1565nm | 1540nm to 1565nm |
| Input Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
| Output Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
| Polarization Dependent Gain | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB |
| Control Mode | ACC, APC, AGC (optional) | ACC, APC, AGC (optional) | ACC, APC, AGC (optional) |
L-Bａnd or other output power models are available upon request
Rackmount High Power EDFA Specifications
| AEDFA-37-R | AEDFA-40-R | AEDFA-43-R | |
|---|---|---|---|
| Saturation Output Power | Min. +37dBm (at +3dBm input signal) | Min. +40dBm (at +3dBm input signal) | Min. +43dBm (at +10dBm input signal) |
| Input Signal Level | -3 to +10dBm | -3 to +10dBm | 0 to +13dBm |
| Noise Figure | Typ. 6.0dB (at +3dBm input signal) | Typ. 6.5dB (at +3dBm input signal) | Typ. 8.5dB (at +10dBm input signal) |
| Operating Wavelength | 1545nm to 1565nm | 1550nm to 1565nm | 1550nm to 1565nm |
| Input Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
| Output Isolation | Min. 30dB | Min. 30dB | Min. 30dB |
| Polarization Dependent Gain | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB | Typ. 0.3dB, Max. 0.5dB |
| Control Mode | ACC, APC (optional) | ACC, APC (optional) | ACC, APC (optional) |
L-Bａnd or other output power models are available upon request
General Parameters
| unit | value | |
|---|---|---|
| Operation Temperature | °C | 0 to 40 |
| Storage Temperature | °C | -10 to 70 |
| Power Supply | VAC | 90 – 240, 47 – 63Hz |
| Benchtop Dimensions | mm | 260(W) x 330(D) x 120(H) |
| 2U Rackmount Dimensions | mm | 485(W) x 515(D) x 90(H) or 485(W) x 360(D) x 90(H) for AEDFA-37-R |
| 3U Rackmount Dimensions | mm | 485(W) x 615(D) x 150(H) for AEDFA-40-R, AEDFA-43-R |
| Mechanical Safety Control | Key-lock switch, BNC interlock key | |
| Optical Power Monitoring | Output power, Input power (optional) | |
| Remote Control Port | DB-9 female (RS232), LabView control software included RJ-45 (TCP/IP Ethernet) (optional) | |
| Protection | Pump laser (TEC) overheat | |
| Optical Connector | FC/APC, FC/UPC, SC/APC, SC/UPC, Bare fiber | |
| Optical Fiber | SMF-28 |
Options
| Narrow bandpass filters |
Ordering Information
| Product Code |
|---|
| AEDFA-xx-y-zz |
| xx : Saturation output power in dBm |
| y : B for Benchtop, R for 19" Rackmount |
| zz : FA for FC/APC, FC for FC/UPC, SA for SC/APC, SC for SC/UPC, NC for bare fiber |
Applications
| SONET/SDH Systems |
| Optical Communications |
| Fiber Optic Sensing |
| CATV |
| Laboratory |
Key Features
| Turnkey device |
| RS232/Ethernet interface |
| High output power, up to 20W |
| High gain |
| Low noise figure |
| Highly reliable and durable |
所有评论仅代表网友意见，与本站立场无关。