量程范围：1至1000 Bar

标准输出信号：0...10VDC(3线)/4...20 mA(2线)

小尺寸KS压力传感器

不锈钢防潮部件KS压力传感器

SIL2 认证KS压力传感器

KS压力传感器基于放在不锈钢膜片上的薄膜敏感元件。KS压力传感器

由于的SMD电子元件和紧凑设计,这些压力变送器坚固耐用和高度可靠,以SIL2认证作为标准。KS压力变送器适用于所有的工业应用, 特别针对液压领域 (压缩机,汞, 动力单元,移动液压系统,等等.) 同时适用于多种恶劣条件,通常可以抵抗高水平的冲击、振动、压力和温度峰值。

Output signal	VOLTAGE	CURRENT
Non Linearity (BFSL)	± 0.15% FS (typ) ± 0.25% FS (max)
Hysteresis	+ 0.1% FS (typ) + 0.15% FS (max)
Repeatability	± 0.025% FS (typ) ± 0.05% FS (max)
Zero offset tolerance	± 0.15% FS (typ) ± 0.25% FS (max)
Span offset tolarance	± 0.15% FS (typ) ± 0.25% FS (max)
Accuracy at room temperature (1)	< ± 0.5% FS
Pressure ranges (2)	From 1 bar to 1000 bar (See table)
Resolution	Infinite
Overpressure (without degrading performance)	See table
Pressure containment (burst test)	See table
Pressure Media	Fluids compatible with Stainless Steel AISI 430F and 17-4 PH
Housing	Stainless Steel AISI 304
Power supply	15...30Vdc	10...30Vdc
Dielectric strenght	250 Vdc
Zero output signal	0 V (N); 0.1 V (C)	4 mA (E)
Full scale output signal	10 V (N); 10.1 V (C)	20 mA (E)
Allowed load	≥ 5KΩ	see load diagram
Long term stability	< 0.2% FS/per year
Operating temperature range (process)	-40...+125°C (-40...+257°F)
Operating temperature range (ambient)	-40...+105°C (-40...+221°F)
Compensated temperature range	-20...+85°C (-4...+185°F)
Storage temperature range	-40...+125°C (-40...+257°F)
Temperature effects over compensated range (zero)	± 0.01% FS/°C typ. (± 0.02% FS/°C max.)
Temperature effects over compensated range (span)	± 0.01% FS/°C typ. (± 0.02% FS/°C max.)
Response time (10...90%FSO)	< 1 msec.
Warm-up time (3)	< 30 sec.
Mounting position effects	Negligible
Humidity	Fino a 99%RH non-condensing
Weight	80-120 gr. nominal
Mechanical shock	100g/11msec according to IEC 60068-2-27
Vibrations	20g max at 10...2000 Hz according to IEC 60068-2-6
Ingress protection	IP65/IP67
Output short circuit ａnd reverse polarity protection	YES
CE Conformity	According to EC Directive 2004/108/CE
FS = Full scale 1 Incl. Non-Linearity, Hysteresis, Repeatability, Zero-offset and Span-offset (acc. to IEC 61298-2) 2 The operating pressure range is intended from 0.5% to 99% FS 3 Time within which the rated performance is achieved

产品选型
	信号输出
	C 0.1...10.1 Vdc
	E 4...20 mA
	*N 0...10 Vdc**
	\|	PRESSURE CONNECTION
	\|	E (DIN 3852-E)
	\|	3 G1/2 gas male (DIN 3852-E)
	\|	\|	C DIN (P8)
	\|	\|	Z 4 pin connector M12x1
	\|	\|	4-pin connector DIN
	\|	\|	\|	MEASUREMENT RANGE RANGE
	\|	\|	\|	bar barbar bar
	\|	\|	\|	*B01U 1 B04D 401* B04D 40**
	\|	\|	\|	*B1V6 1.6 B06D 601.6* B06D 60**
	\|	\|	\|	*B02U 2 B01C 1002* B01C 100**
	\|	\|	\|	*B2V5 2.5 B16D 1602.5* B16D 160**
	\|	\|	\|	*B04U 4 B02C 2004* B02C 200**
	\|	\|	\|	*B06U 6 B25D 2506* B25D 250**
	\|	\|	\|	B01D 10 B04C 40010 B04C 400
	\|	\|	\|	B16U 16 B06C 60016 B06C 600
	\|	\|	\|	B02D 20 B01M 100020 B01M 1000
	\|	\|	\|	B25U 25 25
	\|	\|	\|	* SIL certification not available
	\|	\|	\|	\|	ACCURACY
	\|	\|	\|	\|	M ±0.5%FS
	\|	\|	\|	\|	\|	RESPONSE TIME
	\|	\|	\|	\|	\|	V Fast (< 1 msec)
	\|	\|	\|	\|	\|	\|	Mechanical and/or electrical characte- ristics differing from standard may be arranged on request.
KS	E	3	C	B02D	M	V

Instruments manufactured by Gefran are calibrated against precision pressure calibration equipment wich is traceable to International Standards.

Ex: KS - E - E - C - B04C - M - V

Pressure transmitter KS with 4 to 20 mA output signal, G1/4 male (DIN 3852-E) pressure connection, microDIN electrical connector, 0...400 bar pressure range, ± 0.50% FS accuracy, 1 msec response time.

Sensors are manufactured in compliance with: - EMC 2004/108/CE Compatibility Directive

- RoHS 2002/95/CE Directive

- 2006/42/CE Machinery Directive

TPS压力变送器

量程：从0...10 bar到0...1000 bar
（从0...150psi to 0...15000psi)
准确度：± 0.15% FSO 典型
防护等级：IP65/IP67
防湿部件17-4PH
温度范围：-40...+120°C
TPS系列变送器基于应变片粘合在不锈钢上的技术。

创新的机械结构使传感器在安装中对拧紧不敏感。

此传感器适合用于坚固性，可靠性和有高精度要求的应用场合。

产品选型	PRESSURE CONNECTION
	PRESSURE CONNECTION		ELECTRICAL CONNECTION
	Standard		ELECTRICAL CONNECTION
	G 1/4 gas male	1	4-pole connector solenoid	E *
	On request		shielded cable	F
	7/16-20 UNF-2A male (SAE 4 for AS4395-E)	2	4-pole connector	Z *
	G 1/2A (DIN 16288)	3	4-pole connector microsolenoid	M *
	G 1/4 gas female	4	7 pole connector	P
	1/8-27 NPT female	5	6 pole connector	V
	1/4-18 NPT female	6		\|
	1/4-18 NPT male	7		\|
	M14 x 1.5 male	8		\|	B01D B16U B02D C C
	1/8-27 NPT male	9		\|	B25B25U B03D B35U DB25B25U B03D B35U D
	G 1/4 male (DIN 3852-E)	E		\|	B35D B04C B05CMB35D B04C B05CM
<, /TD>	M12 x 1.5 male	R		\|	P15D P25D P03CP15D P25D P03C
	7/16-20 UNF-2A male (SAE 4 for J1926-2) (*)	K		\|	P05C P75DP05C P75D
	7/16-20 UNF-2A female (SAE 4)	F		\|	P01M P15CCP01M P15CC
		\|		\|	P10M P15MP10M P15M
		\|		\|	P02M P25C
		\|		\|	P03M P04M
		\|		\|	P05M P75C
		\|		\|	B06C B07C B01M
		\|		\|	B04D B05D B06D
		\|		\|	B01C B16D B02CD
		\|		\|	\|	ACCURACY	±0.15% FSO typical >200bar/3000psi
		\|		\|	\|	T	±0.15% FSO typical >200bar/3000psi
		\|		\|	\|		±0.25% FSO typical ≤200bar/3000psi
		\|		\|	\|	\|	Mechanical and/or el
TPS		1		E	B01D	T

Ex.: TPS - 4 - V - B07C - T

Pressure transducer TPS with G 1/4 female process connection, 6 pole connector, 0...700 bar measurement range,

± 0.15% FSO accuracy.

Accuracy (1)	± 0.15% FSO typical; ± 0.2% FSO max >200bar/3000psi ± 0.25% FSO typical; ± 0.5% FSO max ≤200bar/3000psi
Resolution	Infinite
Overpressure (without degrading performance) (2)	See table
Pressure containment (Burst test) (3)	See table
Wetted parts	Fluid compatible with INOX 17-4PH Stainless Steel
Body mate, rials	INOX AISI 304 Stainless Steel ａnd Nylon 66GF35V0
Power supply	10 (max 15) Vdc/ac RMS
Common mode voltage	Typical 5V @ 10V supply
Output impedance	350 Ω (± 1)
Load impedance	> 1000 KΩ
Insulation resistance	> 1000 MΩ @ 50Volt
Zero offset and span setting	± 0.5% FSO
Output voltage (sensitivity)	10...40bar / 150...500psi 1,5mV/V 50...60bar / 750...1000psi 2mV/V 100...1000bar / 1500...15000psi 3mV/V
Long term stability	< 0.1% FSO per year
Operating temperature range (process) (5)	-40...+120°C (-40...+248°F),
Compensated temperature range (4)	-20...+85°C (-4...+185°F)
Storage temperature range	-40...+125°C (-40...+257°F)
Temperature effects over compensated range (zero-span)	± 0.01% FSO/°C typical (± 0.02% FSO/°C max.)
Mounting position effects	Negligible
Humidity	Up to 99% RH non condensing
Weight	130 gr. nominal
Mechanical shock	100 g / 11 msec. according to IEC 60068-2-27
Vibrations	20 g max @ 10-2000Hz according to IEC 60068-2-6
Ingress protection	IP65/IP66/IP67

FSO = Full Scale Output
1 Includes combined effects of Non-Linearity BFSL (Best Fit Straight Line), Hysteresis and Repeatability
2 tested for more than 1000 strokes with single duration < 2msec.
3 tested for more than 100 strokes with single duration < 2msec.
4 temperature outside compensated range may cause zero signal drift
5 ambient and/or electronics part temperature must not exceed 105°C