DWF美式电缆分接箱概述 Overview

我公司生产的美式电缆分接箱，以其优良的性能，规范化的设计，优美的外观，广泛应用于电缆配电网系统中的电缆化工程设备，在各大 工业园区，居民小区，城市人口密集区，商业中心以及高层建筑等各种场所得到普遍认同。它以单向开门、横向多通母排为主要特点，具有宽 度小、组台灵活.全绝绿，全密封等显著优点。按照额定电流一股可以分为600A主回路和200A支回路两种。600A主回路采用旋入式螺栓固定 连接；200A分支回路采用拔插式连接且可以带负荷拔插。

With its excellent performance, standardized design and beautiful appearance, the American cable tap box produced by our company is widely used in cable engineering equipment in cable distribution network system. It is widely recognized in various places such as industrial parks, residential districts, densely populated urban areas, commercial centers and high-rise buildings. It is characterized by one-way door opening and transverse multi-pass busbar. It has such remarkable advantages as small width, flexible platform formation, completely green and fully sealed. According to the rated current one can be divided into 600A main circuit and 200A branch circuit. The main circuit of 600A is fixed by screw-in bolts, and the branch circuit of 200A is plug-in and plug-out with load.

DWF美式电缆分接箱型号及含义 Model and meaning

DWF美式电缆分接箱使用环境条件 Use environmental conditions

环境温度：豉高气温：+40°C,豉低气温-30°C 风速：泪当34m/s(不大于700Pa)；

湿度：日相对湿度平均値不大于95%月相对湿度平均值不大于95%；

防裳：水平加速度不大于0.4m/s2，垂直加速度不大于0.15nn/s2 安装地点倾斜度：不大于3°；

安装环境：周围空气应不受腐蚀性、可燃性气体、水蒸气等明显污染，安装地点无剧烈震动。

Ambient temperature: high temperature: +40 C, low temperature - 30 C wind speed: tear when 34m / s (not more than 700Pa)

Humidity: The average daily relative humidity is not more than 95% and the average monthly relative humidity is not more than 95%.

Earthquake prevention: horizontal acceleration is not more than 0.4m/s2, vertical acceleration is not more than 0.15nn/s2 installation site tilt: not more than 3 degrees

Installation environment: ambient air should not be obviously polluted by corrosive, flammable gases, water vapor, etc. There is no severe vibration at the installation site.

DWF美式电缆分接箱外形及安装尺寸 Shape and installation dimensions