机床特点：

★  本机床主要适用于中小型钢芯胶辊轴类外圆磨削加工

★  该机床工作台、砂轮架进退除手动外，还可液压驱动，并具有各种范围工件切入半自动和纵磨半自动定程磨削

★ 本机床砂轮主轴采用三片瓦动承，回转精度高，寿命长

★ 砂轮采用胶辊专用砂轮进行磨削

★ 机床控制采用PC控制，性能稳定

技术规格：TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

距Distance between centers                                                    370mm

磨削直径Diameter to be ground                                                   φ5-φ125mm

磨削长度Max. length to be ground                                               350 mm                                                       

工件重量Max. weigth of workpiece                                                10kg

工作台回转角度Table rotation angle                                                   ± 7°

头架的回转角度Rotation angle of headstock                                   ± 45°

砂轮架回转角度Rotation angle of grinding wheel rack                                   ± 180°

砂轮尺寸Dimensionof Max. grinding wheel                              φ300×（20-40）×φ127mm

砂轮线速度Linear speed of grinding wheel                                            ≤35m/s                                                 

砂轮架电机功率Motor power of grinding wheel rack                                     2.2kw

机床外形尺寸Outline dimension of machine tool                     

2400×1160×1300mm

 净重  Net weight                                                                  2100 Kg

 毛重  Gross weight                                                              2200 Kg

平面布置图

1. 主机高度1300mm

2. 机床应安装在远离震源的坚固基础上，用机床底下的3块垫铁来调整安装水平。用水平仪检查机床的水平性。纵向≤0.04/1000，横向≤0.04/1000。