主要用途:适用于各种皮料的喷胶、贴合
适用胶水:白胶,水性胶、亚么尼亚胶,油性胶
适用范围:400*350mm
主要优点:
1. 整合工序( 将以往喷胶工序和贴合工序在一台设备上完成);设备有四个料仓,也就是可以将三道贴合的工序整合到一个工序完成,从而提高效率节省人工。
2. 喷胶轨迹可以在电脑上编辑好后通过USB接口直接导入并保存,便于后期翻单使用,也可以在设备控制面板上直接示教编辑路径。
3. 四个料仓的定位可以根据物料不同任意组合达到定位的作用,并且每个料仓上有专门的定位销固定托板,方便翻单生产无需再编辑相关数据直接调用之前保存的文件即可。
4. 贴合后同时也有拍压的工序,充分保证质量 。
5. 设备采用的是进口专用喷枪适合多种胶水的喷涂作业,并且喷涂均匀效果佳。以适应广大客户的不同生产需要。
6、喷胶速度可调,根据不同的喷胶需要,可以调节喷胶的速度,已达到的生产效益。
部分参数:
型号 | Model | JL-PT4035 |
额定电压 | Rated voltage | AC220V |
额定功率 | Rated power | 1.8KW |
范围W*L | Maximum edge range | 400*350mm |
气源压力 | Air pressure | 0.5-0.6MPa |
包装尺寸 | Outsize | 2350*1790*2180mm |
JL-PT4035 Automatic glue laminating machine
Main uses: applicable to all kinds of leather glue, laminating
Apply the glue: water-based adhesive, oily glue
Applicable scope: 400*350mm
The main advantage:
1. integration process (the spraying process and process fit on a single device; complete) device has four silos, also can be integrated into the three fitting process a complete process, so as to improve the efficiency of labor saving.
2. can be edited in the spraying trajectory on the computer through the USB interface directly imported and preserved, later turning a single use, can also direct teaching edit path on the device control panel.
3. four silos can according to different materials to any combination of positioning function, and each bin has a special positioning pin fixed plate, easy to turn single production without editing relevant data directly call before saving the file.
4. There are also bonded film pressure process, fully guarantee the quality.
5. equipment is used in spraying gun for a variety of imported special glue, and uniform spraying effect. In order to meet the customers different needs.
6, spray speed can be adjusted according to different usage needs, can adjust the spraying speed, has reached the optimum production efficiency.
所有评论仅代表网友意见,与本站立场无关。