-
01 CRC质量管理体系认证
风机测试符合JB/T 10981-2010和JB/T 10562-2006国家标准的要求,风机设备连续运行24小时不损坏,长久使用寿命,节能高效(省电),为您创造利润,节省成本。
-
02 保养操作简单
采用紧凑的叶轮设计结构满足风机的高转速运行。叶片设计风量大,延长使用寿命,降低故障频率,模组化生产,规格统一,零配件材料齐全,可在短时间内、节约成本,快速完成安装维修。
-
03 提供服务团队
1对1服务,提供到公司测量性能、震动,提供测试报告,防范故障于未然,保障风机在状况下运转。可针对客户的特殊规格,量身定制设计,确保风机运转于率点。
-
PFT35-11型塑料轴流式通风机系列
PFT35-11型塑料轴流式通风机叶片采用进口乙烯基树脂(玻璃钢FRP)复合材质制作而成、外壳均采用聚丙烯板加热压模焊接而成。该系列风机具有结构简单、低噪音、安装简便、防腐性能良好、静压及效率高、运转平稳、机械振动小等特点。广泛应用于酸洗工段、化验室、地下室、发电厂、电镀、氧化厂等含有腐蚀性气体的场所使用。也适用于一般工矿企业、仓库、办公楼、住所等场所通风换气使用。更可以应用于较长管道内间隔串联安装,用以提高管道内的压力。所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒150mg/m3、气体温度≤60℃、相对湿度≤99%。 -
PFT35-11 plastic axial flow fan series
The PFT35-11 plastic axial flow fan blade is made of imported vinyl resin (glass fiber reinforced plastic FRP) composite material, and the outer casing is made of polypropylene plate heating die welding. The series of fans have the characteristics of simple structure, low noise, easy installation, good anti-corrosion performance, high static pressure and high efficiency, stable operation and small mechanical vibration. Widely used in pickling stations, laboratories, basements, power plants, electroplating, oxidation plants and other places containing corrosive gases. It is also suitable for ventilation and ventilation in general industrial and mining enterprises, warehouses, office buildings, residences and other places. It can be applied to the installation of long pipelines in series to increase the pressure inside the pipeline. The transported gas is not allowed to contain viscous substances, dust and hard particles 150mg/m3, gas temperature ≤60°C, relative humidity ≤99%.
机 号 Model(NO) | ||||
---|---|---|---|---|
功 率 Power(KW) | 转 速 Speed(r/min) | 流 量 Volume(M3/h) | 全 压 Pressure(Pa) | |
2.8 | 0.25 | 2900 | 2778 | 186 |
0.09 | 1450 | 1392 | 47 | |
3.15 | 0.55 | 2900 | 4155 | 247 |
0.37 | 2900 | 3418 | 189 | |
0.18 | 1450 | 2415 | 51 | |
0.12 | 1450 | 2078 | 62 | |
3.55 | 1.1 | 2900 | 5951 | 314 |
0.75 | 2900 | 5380 | 280 | |
0.25 | 1450 | 3457 | 65 | |
0.18 | 1450 | 2981 | 78 | |
4 | 1.5 | 2900 | 7685 | 354 |
1.1 | 2900 | 6999 | 305 | |
0.37 | 1450 | 4945 | 83 | |
0.25 | 1450 | 4261 | 100 | |
4.5 | 0.55 | 1450 | 6455 | 108 |
0.37 | 1450 | 6067 | 126 | |
5 | 0.75 | 1450 | 8712 | 165 |
0.55 | 1450 | 7907 | 146 | |
0.37 | 960 | 5768 | 72 | |
5.6 | 1.1 | 1450 | 12239 | 206 |
0.75 | 1450 | 10168 | 163 | |
0.37 | 960 | 8103 | 90 | |
6.3 | 2.2 | 1450 | 17426 | 261 |
0.75 | 960 | 10472 | 101 | |
7.1 | 2.2 | 1450 | 16501 | 251 |
1.1 | 960 | 16514 | 145 | |
8 | 7.5 | 1450 | 35682 | 420 |
5.5 | 1450 | 29644 | 332 | |
2.2 | 960 | 23624 | 184 | |
9 | 4 | 960 | 33937 | 233 |
3 | 960 | 30532 | 206 | |
10 | 7.5 | 960 | 46141 | 288 |
4 | 710 | 38333 | 227 | |
11.2 | 11 | 960 | 64825 | 361 |
7.5 | 960 | 53855 | 285 |
外形及安装尺寸示意图 Lnstallation size diagram
产品为人工实物测量会有一定误差,一切以收到的实物为准。 单位Unit: mm(毫米)
机号 | ||||
---|---|---|---|---|
外形尺寸 | ||||
NO | ΦD1 | ΦD2 | ΦD4 | H |
2.8 | 300 | 375 | 375 | 290 |
3.15 | 315 | 395 | 395 | 295 |
3.55 | 375 | 450 | 450 | 325 |
4 | 407 | 500 | 500 | 321 |
4.5 | 465 | 555 | 555 | 330 |
5 | 518 | 608 | 608 | 370 |
5.6 | 565 | 650 | 650 | 430 |
6.3 | 610 | 710 | 710 | 435 |
7.1 | 720 | 770 | 770 | 500 |
8 | 810 | 900 | 900 | 530 |
9 | 905 | 1030 | 1030 | 530 |
10 | 1000 | 1100 | 1100 | 650 |
11.2 | 1030 | 1250 | 1250 | 650 |
所有评论仅代表网友意见,与本站立场无关。