如果您需要更多详细信息，请联系我们：sales（点击！！

This module has Four (4) input channels, each configurable for configurable to receive current and voltage signals ranging from -21 to 21 mA and -10 to +10VDC respectively.

Input signal type selection is made through the provide DIP switches. The received voltage signals passes through an Analog to Digital (ADC) converter for conversion of analog data to binary codes stored in the analog input register. The converted data may be formatted as Raw / Proportional and Scale for PID.

If used with MicroLogix 1100, up to Four (4) expansion modules are allowed which may be 1764-IF4. If installed with MicroLogix 1200, Six (6) expansion modules may be connected and Seven (7) modules may be attached to MicroLogix 1400.

Expansion modules such as the 1764-IF4 connects to the MicroLogix bus by means of the provided the ribbon cable that is connected by the pin contacts installed at the front panel of every module. This Installation of this module follows the installation method of the MicroLogix base module specifically, DIN rail or direct panel mounting installation.

The module has a dimension of 90 mm (height) x 87 mm (depth) x 40 mm (width) height including mounting tabs is 110 mm 3.54 in.

我们的服务 3500/15 106M1079-01 通用交流电源模块 安装在机架左侧的槽位上

1.交货港：中国厦门

2.联邦快递，顺丰快递，京东快递，德邦快递，

3.库存，立即发货

4.所有产品均为全新原包装盒。

5.我们将用泡沫将所有货物包装在一个纸箱中，以抗震。

6.一旦我们发货，您将获得尺寸和重量。