SCXI 1193可实现以下拓扑结构:四路8 x 1多路复用器、四路4 x 1端接多路复用器、双路16 x 1多路复用器、双路8 x 1端接多路复用器、32 x 1多路复用器、16 x 1端接多路复用器和独立模块。这射频多路复用器开关模块可用于多种不同的电缆。这些电缆包括:MCX-MCX电缆、MCX-BNC电缆、MCX-SMB电缆或MCX-SMA电缆。每根电缆都有0.3米或1.0米长。还有一个50欧姆的MCX终端可用。当50欧姆MCX终端位于32个通道的一半时,用户可以将该模块用作端接多路复用器。该器件的DC功率要求为:50毫安时为+5伏直流电,170毫安时为+18.5伏至+25伏直流电,170毫安时为-18.5伏至-25伏直流电。这NI SCXI-1193模块有36个用于I/O连接器的MCX插孔,2个用于触发连接器的SMB插孔,由银钯和金制成的继电器,扫描速率为每秒100次操作。该装置为机电闭锁继电器类型。NI设备重2盎司,尺寸为1.2 x 6.8 x 7.8英寸。在物理维度上。它的推荐工作温度范围为0°C至50°C,储存温度范围为-20°C至70°C,非冷凝湿度范围为5%至85%。
SCXI-1193
The NI SCXI-1193 (Part Number: 776572-93) is a high-density, 32-Channel RF Multiplexer Switch Module, which can be arranged as an unterminated multiplexer, externally terminated multiplexer, or dimensionally versatile sparse matrix. Every arrangement can withstand signal frequencies from DC to over 500 MHz. This module has one slot and utilizes high-density push-on MCX connectors for discrete but manageable cabling. This module does not enable directing signals to the high-voltage analog bus. The SCXI-1193 is created to integrate with high-frequency devices, which includes the PXI-5404 Frequency Generator and the PXI-5112 High-Speed Digitizer.
The following topologies are achievable with the SCXI 1193: a Quad 8 x 1 Multiplexer, a Quad 4 x 1 Terminated Multiplexer, a Dual 16 x 1 Multiplexer, a Dual 8 x 1 Terminated Multiplexer, a 32 x 1 Multiplexer, a 16 x 1 Terminated Multiplexer, and an Independent module. This RF Multiplexer Switch Module can be used with several different cables. These cables include: the MCX-MCX cable, the MCX-BNC cable, the MCX-SMB cable, or the MCX-SMA cable. Each of these cables can be purchased in a 0.3 m or 1.0 m length. There is also a 50 Ohm MCX Terminator available. When the 50 Ohm MCX Terminator is on half of the 32 channels, then the user can utilize the module as a terminated multiplexer. The device has a DC power requirement of +5 VDC at 50 mA, +18.5 VDC to +25 VDC at 170 mA, and -18.5 VDC to -25 VDC at 170 mA. The NI SCXI-1193 module has 36 MCX jacks for I/O connectors, 2 SMB jacks for trigger connectors, relays made of silver palladium and gold, and a maximum scan rate of 100 operations per second. The device has an electromechanical latching relay type. The NI device weighs 2 oz, and measures 1.2 x 6.8 x 7.8 in. in physical dimensions. It has a recommended operating temperature range of 0 °C to 50 °C, a storage temperature range of -20 °C to 70 °C, and a noncondensing humidity range of 5% to 85%.
如果您需要任何东西,我们能够解决您的缺陷零件或更换,
欢迎垂询
控制系统(DCS、PLC/SPS、CNC)
– 面板控制器
– 人机界面和显示面板
– 工业电脑
– 驱动器(变频器和伺服)
-电机
– 电源
雄霸自动化秉承精益求精的企业理念,无论是工业自动化零部件,
服务还是交付效率,我们都致力于做得更好。
为什么选择雄霸?SCXI-1193 NI 32通道RF多路复用器开关模块 承受从DC到500 MHz以上的信号频率
雄霸自动化有限公司拥有大量的工业电子元件选择,包括新的和停产的。
这些范围从三十年到。
投资新技术并不总是必要的。
我们很乐意帮助您保持旧设备处于良好状态。
我们目前库存超过 20,000,000 件商品,建议零售价超过 2 亿美元。
雄霸自动化有限公司在获得优质产品的同时节省了大量成本。
再次感谢您访问雄霸自动化有限公司。
有关订单问题和技术支持,请通过网站或电子邮件与我们联系。
对这些产品可能感兴趣:SCXI-1193 NI 32通道RF多路复用器开关模块 承受从DC到500 MHz以上的信号频率
所有评论仅代表网友意见,与本站立场无关。