AW83-YAMATO玻璃器皿清洗机-安捷来国际股份（香港）有限公司

YAMATO玻璃器皿清洗机：

LaboratoryWasher

AW83

Model

AW83

Washing Time(EachProcess)

1 to 99min. Setting

WashingWater Temp.

Supplied Temp.to80°C

Features :

Two Washing Chambers
Selectable Three Washing Patterns
Jet Rack (Option) can remove the dirtofcontainers more easily
Fixing Type Rack and Spinning Type Jet Nozzlecanavoid the brakeage of containers
Available Hot Water Washing byBuilt-inHeater
Liquid Detergent is automatically suppliedfromDetergent Container (Powder Detergent also available byaddingpowder in each time)

ControlPanel	JetNozzle

Dimensions(mm)	Sequence/TimeChart

Specifications

Model	AW83
Performance
Washing Compartment	Two Washing Chambers
	Pressure Water Jet from Two Directions; TopandBottom, Jet Nozzle Spinning
	Fixed Rack (Changeable to Batch TypeJetRack)
Washing Pattern	Selectable Three Washing Patterns※Final RinseisOption
	1. Pre-washing à Washing à Rinse àFinalRinse*
	2. Washing à Rinse à Final Rinse*
	3. Rinse à Final Rinse*
Washing Time	Pre-washing, Washing, Rinse: Settable 1to99min.
	Rinse: Settable up to 5 times byBatchSystem
	Final Rinse (To connect with Pure WaterSupplyingSystem): Rinse by Pure Water 50L, Settable up to 5 times, Start towashafter reaching to the Set Water Level, Timer Count startsafterreaching to the setting Temp.
Supplying Water Temp.	Room Temp. to 80°C
Washing Water Temp.	Supplied Temp. to 80°C
Washing Water Temp.	Same Water Temp. for Pre-washing and Washing,NoWater Heat-up for Rinse and Final Rinse
Liquid Detergent Supplying Type	Automatic Supply by Pump (AdjustableSupplyAmount)
Liquid Detergent Tank Capacity	2L
Required Water Amount	Approx. 28L for each Pre-wash, WashandRinse
Hot Water Supply System	Heater (Built-in: 6kW) Heat-up or connectiontoPrimary Hot Water Supply
Container Stand	Shelf Board 2pcs. (Standard)
Water Supplying System	Electromagnetic Valve Open/Close, WaterFlowamount is fixed by flow Switch
Water Drain System	Forced Drain by Pump
Standard
Power	Three-phase, AC200V, 50/60Hz, 30A
Exterior	Steel Plate, Melamine Resin Paint
Interior	Stainless Steel
External Dimensions	W860 x D770 x H1,795mm
Inner Bath Dimensions	W600 x D630 x H1,080mm
Pump	Washing Pump: Three-phase, AC200V,50/60Hz,355W/560W
Pump	Drain Pump: Single-phase, AC200V, 45W
Shelf Board	550 x 550mm, Max. Load 245N (25kg)
Weight	Approx. 220kg
Accessory
Supply Hose	I.D.18mm, 2m x 1pc
Drain Hose (with Coupler)	2m x 1pc
Detergent	(Amorphous Phosphorus) 1kg
Measuring Spoon (for 50ml)	1pc
Test Tube Rack Support	1pc
Hose Clamp	1pc.,

Optional Item (for AW83)

Pure Water Supplier	O.D. W420 x D600 x H1,065mm
	Electric Power For Pump:355W/560W(50/60Hz)
	Pure Water Tank Capacity: 50L
	Ion Exchange: Mixed Bed Type, ResinAmount10L
	Cartridge: Collectable Water Amount1,500L,Warning Lamp ON after 30times Final Rinse
Jet Rack	44pcs. Settable in case of 100mlFemaleFlask
Beaker Rack	Approx. 85pcs. settable in case of50mlBeaker
Test Tube Rack	Approx. 600ps. settable in case of Φ16.5mmTestTube
Test Tube Rack Support	Approx. 68pcs. settable in case of50mlFlask
Flask Rack	To be ordered together with AW83 Port Position Change for Supply and Drain from Right toLeftSide
Amorphous Phosphorus Detergent	8kg