测试。
The anti-corrosion layer bending tester is used to test the crack resistance and peeling performance of the substrate when the paint, varnish and related product coatings are bent around a cylindrical axis. test.
防腐层抗弯曲试验装置可用于厚度不大于1mm的试板，只要能保证轴不发生变形，也可用于较厚的软金属如铝试板、镀锌板、塑料试板。对于厚度大于0. 5mm的试板，建议避免使用直径小于10mm的轴进行试验。
本仪器适用于GB/T6742-86JT/T374-1998《隔离栅技术条件》
JT/T281-2007《高速公路波形梁钢护栏》、
ISO1519-73 ASTMD522.
The anti-corrosion layer bending tester can be used for test plates with a thickness of not more than 1mm. As long as the shaft is not deformed, it can also be used for thicker soft metals such as aluminum test plates, galvanized plates, and plastic test plates. For test plates with a thickness greater than 0.5mm, it is recommended to avoid using shafts with a diameter less than 10mm for testing. This instrument is suitable for GB/T6742-86JT/T374-1998 "Isolation Barrier Technical Conditions" JT/T281-2007 "Highway Corrugated Beam Steel Guardrail", ISO1519-73 ASTMD522.
防腐层抗弯曲试验装置技术参数：
★试验轴的直径为2、3、4、5、6、8、10、12、16、20、25、和32、mm
★转轴柄调整数量大于17mm，与试棒贴紧时如许缝隙为0.1mm
★试验应在23±2°C的温度和50±5%相对温度下进行。
Technical parameters of anti-corrosion layer bending tester
★ The diameter of the test shaft is 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, and 32, mm
★ The adjustment quantity of the shaft handle is greater than 17mm, and the gap is 0.1mm when it is close to the test bar.
★ The test should be carried out at a temperature of 23±2°C and a relative temperature of 50±5%.
所有评论仅代表网友意见，与本站立场无关。