| Item | MODEL | MCV-M8H | MCV-M8 | MCV-M11H | MCV-M11 |
| Travel | X/Y/Z-axis mm | 800/500/500 | 1100/650/600 | ||
| Spindle nose to table surface mm | 110~610 | 100~700 | |||
| Spindle center to column surface mm | 550 | 675 | |||
| X/Y/Z way span mm | 370/600/456 | 466/840/526 | |||
| Position/Repeatability accuracy mm | ±0.005 | ||||
| Ball bar accuracy mm | ≧0.01 | ||||
| Spindle | Spindle taper | BT-40 | |||
| Spindle transmission | Direct-coupled | Belt | Direct-coupled | Belt | |
| Spindle speed rpm | 12000/15000 | 10000 | 12000/15000 | 10000 | |
| Control | CNC control | FANUC/Mitsubishi | |||
| Spindle motor KW | 5.5/7.5 | 7.5/11 | |||
| X,Y,Z motors KW | 1.5/2.0/3.5 | 1.5/2.0/2.0 | 3.0/3.0/7.0 | 3.0/3.0/3.0 | |
| Table | Table size(WxL) mm | 900x500 | 1300x600 | ||
| T-slots(WidthxNo.xPitch) mm | 18x5x100 | 18x5x125 | |||
| Max. load Kg | 600 | 1000 | |||
| Feed | Rapid feed rate(X/Y/Z) M/min. | 36/36/30 | |||
| Cutting feed rate M/min. | 1~12 | 1~8 | 1~12 | 1~8 | |
| Min.input increment mm | 0.001 | ||||
| Magazine | Max. tool dia./with adjacent tool mm | Φ77.5/150 | |||
| Max. tool weight Kg | 7 | ||||
| Max.tool length(Arm/Carousel type) mm | 300/200 | 300/250 | |||
| Tool selection | Automatic random(Arm type) | ||||
| Tool capacity | Carousel-16 / Arm-24 | ||||
| Pull stud degree | 45? | ||||
| Tool changing time(T to T) sec | 2.5~3.4 | ||||
| Others | Spindle oil cooler L | 5 | |||
| Lubrication capacity L | 2 | ||||
| Heat exchanger Watt | 70 | ||||
| Coolant tank L | 200 | 250 | |||
| Pneumatic unit Kg/cm2 | 6 | ||||
| Power KVA | 15 | 25 | |||
| Machine weight& Dimensions | N.W/G.W.(Approximate) Kg | 4,350 | 4,600 | 7,000 | 7,300 |
| Packing(LxWxH) M | 2.4x2.3x2.5 | 3.4x2.3x2.5 | |||
| Floor space(LxWxH) M | 2.38x2.28x2.85 | 3.0x2.9x3.0 | |||
| Specifications subject to change without notice. | |||||
| STANDARD ACCESSORIES | OPTIONAL ACCESSORIES | ||||
| ● Direct-coupled spindle(H type) | ● Cooling ring around spindle | ||||
| ● Belt drive spindle | ● Coolant through spindle system | ||||
| ● Fully enclosure splash guard | ● Chain type conveyor | ||||
| ● Spindle air blast | ● Upgrade spindle motor | ||||
| ● Spindle chiller unit | ● BT30 spindle taper | ||||
| ● Auto lube system | ● Oil skimmer | ||||
| ● Coolant unit | ● 20T carousel type ATCarm type ATC | ||||
| ● Count-weight(for belt drive) | ● 24/30T arm type ATC | ||||
| ● Air gun | ● 12000/15000/24000 RPM BT40 or HSK | ||||
| ● Halogen work lights | |||||
| ● Wash down nozzles | |||||
| ● RS-232 interface | |||||
| ● Heat exchanger on electric cabinet | |||||
| ● Auto power off and alarm light | |||||
| ● Tool box with adjusting tools | |||||
| ● Leveling pads and adjusting screws | |||||
| ● Operating manual and part list | |||||
所有评论仅代表网友意见，与本站立场无关。