61664 61631-pall玻璃纤维过滤膜Type A/E Glass Fiber Filter-上海力敏实业有限公司

pall玻璃纤维过滤膜Type A/E Glass Fiber Filter

产品特点：

Type A/E meets the requirements for suspended solids testing, as described in Standard Methods for the Examination of Water and Wastewater, current edition.
在过滤难以过滤或高度污染的溶液时，可以减少过滤成本和过早堵塞。
通过高容量预过滤器，延长过滤器寿命、减少zui终过滤器更换频率。
消除样品污染。无粘合剂硼硅酸盐玻璃纤维无附加析出物。
利用一系列可选过滤器厚度，过滤各类颗粒负载和粘稠溶液。

pall玻璃纤维过滤膜Type A/E Glass Fiber Filter

技术参数：

描述	Type A/E	Type A/B	Type A/C
典型应用	Water solids testing, air monitoring, gravimetric analysis	Diagnostic applications, sample prefiltration	Cell harvesting, prefiltration, solids testing
Filter Media	Borosilicate glass without binder	Borosilicate glass without binder	Borosilicate glass without binder
Pore Size (Nominal)	1 微米	1 微米	1 微米
Typical Thickness	330 μm (13 mils)	660 μm (26 mils)	254 μm (10 mils)
Typical Water Flow Rate mL/min/cm2 at 0.3 bar (30 kPa, 5 psi)	250	124	153
Typical Air Flow Rate L/min/cm2 at 0.7 bar (70 kPa, 10 psi)	60	24	40
Maximum Operating Temperature	Air - 550 °C (1,022 °F)	Air - 550 °C (1,022 °F)	Air - 550 °C (1,022 °F)
Sterilization	Autoclavable	Autoclavable	Autoclavable
Typical Aerosol Retention*	99.98%	–	–


描述	Type A/D	Extra Thick Discs	Metrigard? Discs	TCLP
Typical Applications with large-sized particulate	Prefiltration of solutions contaminated samples	Prefiltration of heavily	Prefiltration in systems with high particulate matter	U.S. EPA Method 1311
Filter Media	Borosilicate glass without binder	Glass fiber with acrylic binder**	Ultrafine glass fiber with acrylic binder**	Borosilicate glass without binder***
Pore Size (Nominal)	3 微米	1 微米	0.5 微米	0.7 微米
Typical Thickness	660 μm (26 mils)	1270 μm (50 mils)	330 μm (13 mils)	432 μm (17 mils)
Typical Water Flow Rate mL/min/cm2 at 0.3 bar (30 kPa, 5 psi)	649	210	80	–
Typical Air Flow Rate L/min/cm2 at 0.7 bar (70 kPa, 10 psi)	139	26	21	–
Maximum Operating Temperature	Air - 550 °C (1,022 °F)	Water - 135 °C (275 °F)	Water - 135 °C (275 °F)	不可用
Sterilization	Autoclavable	Autoclavable	Autoclavable	Autoclavable
Typical Aerosol Retention*	–	99.97%	–

订购明细：

Type A/E Glass Fiber Discs and Sheets, 1 μm
61628	13 mm	500/pkg	Call
61630	25 毫米	500/pkg	Call
60097	30 mm	100/pkg	Call
61654	35 mm	100/pkg	Call
61652	37 mm	500/pkg	Call
65475	42.5 mm	100/pkg	Call
61631	47 mm	100/pkg	Call
61632	50 mm	100/pkg	Call
60140	55 mm	100/pkg	Call
60012	57 mm	100/pkg	Call
60150	63 mm	100/pkg	Call
61665	70 mm	100/pkg	Call
61663	76 mm	100/pkg	Call
60010	81 mm	100/pkg	Call
60127	82.5 mm	100/pkg	Call
60118	85 mm	100/pkg	Call
61664	90 mm	100/pkg	Call
61633	102 mm	100/pkg	Call
60115	110 mm	100/pkg	Call
61655	124 mm	100/pkg	Call
65476	125 mm	100/pkg	Call
61669	127 mm	100/pkg	Call
66559	142 mm	25/pkg	Call
61635	142 mm	100/pkg	Call
61675	257 mm	100/pkg	Call
61636	265 mm	100/pkg	Call
66560	293 mm	25/pkg	Call
61637	293 mm	100/pkg	Call
61638	8 x 10 in.	100/pkg