描述
Base machine
| Axis stroke Z | mm | 400 |
| Axis stroke Y | mm | 200 |
| Axis stroke X | mm | 410 |
| Power/Axis force Z-Y | 2,5 kW / 500 daN (option linear drives = 7,2 kW / 350 daN) | |
| Power/Axis force X | 4,8kW / >550 daN | |
| Rapids X-Y-Z | 40m/min (option linear drives = 50m/min) | |
| Acceleration X-Y-Z-W | 8 m/s2 / 0,8g (options linear drives = 10,4 m/s2 / 1,1g) | |
| Resolution X-Y-Z-W | mm | 0,0001 |
Main Spindel C
| Power (direct drive) | kW | 15 |
| Torque S1 S2 S3 | Nm | 22 / 27 / 36 |
| Rpm turning | rpm | 6.000 (8.000 option) |
| Rpm milling | °/min | 90.000 |
| Clamping force | F= 2.900 at 6 bar / FT= 38.000 N at 30 bar | |
| Resolution | ° | 0,0001 |
| Bar capacity | mm | 32 |
| Clamping systems | F38 / Ottet / Mecatool / Jaw-chuck |
Tilt axis B (direct drive)
| Torque cont/max | Nm | 106/226 |
| Tilting speed | °/min | 36.000 |
| Blocking torque | Nm | 200 |
| Resolution | ° | 0,0001 |
| Tilting range | ° | -25 / +115 |
Milling spindle
| Power S1/S6 | kW | 8 |
| Torque S1/S6 | Nm | S1=9,5 / S6=11,5 |
| Max. rpm | rpm | 30.000 |
| Tool holder camping force | N | 2.000 |
| Locking system | Mechanical locking with straight gears | |
| Tool interface | HSK-A-40 | |
| Max. through spindle coolant pressure | bar | 100 |
Tool changer
| Capacity | 30 (option 60 or 90) | |
| N° of turning tools | All tools possible | |
| Tool change time | sec | 1,2 |
| Chip-to-chip time | sec | 3,2 |
| Max. Tool weight | kg | 1,2 |
| Max. Tool diameter | mm | 40 |
| Max. Tool lenght | mm | 130 |
CNC control
| Type/Screen | FANUC 30 series type 31iA-5 / 15″ |
Retaking options (On W-axis)
| Axis stroke | mm | 330 |
| Power force | kW | 2,5 |
| Axis force | daN | 550 |
| Rapid | m/min | 40 |
| Resolution | mm | 0,0001 |
Retaking vice
| Self-centering parallel-vice | pneumatic | |
| Clamping force | 4.200 N at 6 bar | |
| Other clamping devices | ID or OD collets / OTTET from collets | |
| Resolution | mm | 0,0001 |
Subspindle (A-axis)
| Power (direct drive) | kW | 15 |
| Torque S1 / S2 / S3 | Nm | 22/27/36 |
| Rpm turning | 6.000 min1 | |
| Rpm milling | °/min | 90.000 |
| Clamping force | 9.500 N at 5 bar | |
| Resolution | ° | 0,0001 |
所有评论仅代表网友意见，与本站立场无关。