noiseken ESS-2000AX 静电放电发生器已停产,noiseken ESS-2000AX 静电放电发生器,符合:IEC 61000-4-2相关标准.ESS-2000AX是日本 NOISEKEN公司新推出的型号,可以替代已停产的ESS-2000静电放电发生器.

ELECTROSTATIC DISCHARGE SIMULATOR
MODEL ESS-2000AX CONFORMING TO IEC 61000-4-2*

TC-815R

TC-815R ESS-2000AX
(The Gun stａnd PS-806 in the photo is an optional accessory.)

noiseken ESS-2000AX 静电放电发生器

GENERAL

The ESS-2000AX ESD Simulator generates highly consistent, repeatable ESD pulses up to 30kV in both contact and air discharge modes. Compliant with IEC61000-4-2 standard, the unit features a 5.7-inch display, a lightweight gun and optic serial interface.

A variety of capacitor and resistor units are available and are easily changeable within the gun. The fully- programmable, menu-driven simulator offers three trigger modes.

FEATURES
noiseken ESS-2000AX 静电放电发生器

Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence
A 5.7-inch color LCD for easy setting and good visibility
Unique shape for the operator's easy access to the control and displays even when the unit is put on the floor level (ground plane)
Communications with PC through the optic serial interface
A wide variety of the dedicated options

SPECIFICATIONS
noiseken ESS-2000AX 静电放电发生器

Item		ESS-2000AX Specifications
Output polarity		Positive or negative
Output voltage		0.20kV~30.0kV ±5% (30.5kV max) 0.20kV~10.0kV: 0.01V step, 10.0kV~30.0kV:0.1V step
Discharge interval		Normal mode: 0.05s~600.0s ±10% Extra mode : 1.00s~600.0s ±10% 0.05s~9.99s: 0.01s step, 10s~600.0s: 0.1s step
No. of times of discharge		1~60,000 times preset on the counter or continuous
Discharge mode		Air/contact discharge
Radiation level		Normal/Extra mode
Trigger mode		Gun trigger/main unit trigger/ external trigger
Operation mode	IEC standard	Contact discharge: 2.0kV, 4.0kV, 6.0kV, 8.0kV (4 voltages preset) Air discharge: 2.0kV, 4.0kV, 8.0kV, 15.0kV (4 voltages preset)
	Manual	Contact/Air discharge: 0.20kV～30.0kV Sweep (automatic voltage ramping) available Up to 99 units (test settings) storable
	Sequence	Seamless run of the selected test sequence (made of any combination of 99 units in Manual mode) No. of units per one test sequence: up to 30 units No. of test sequences: up to 20
Warning lamp		Lights up while the HV circuitry is on Blinks while discharges are in progress
Discharge gun		TC-815R
Charging resistance		10M ohm(53 M ohm for combination with TC-815R discharge gun)
AUX connector		D-SUB15 pin, female connector Warning lamp (optional) connection Automatic ESD Eliminator (optional) connection External interlock input External trigger input
Optical communication connector		Optic RS-232C for PC communication
Power supply		100~240V AC 50/60 Hz ±10%
Power consumption		75VA
Operating temperature and humidity		+15~+35ºC, 25~75% (no condensation)
Character display		English or Japanese
Dimensions and weight		260 (W) X 230 (H) X 285 (D) mm (projection excluded) Approx. 5.3 kg