双温型水循环模温机產品特點Features：
●採用單馬達雙溫泵，可提供兩組不同的溫度控制,節省電能與空間
●This type can provide two different temp. for ulation controller.
●採用土耳其製『CIRO』意大利製『MERI』馬達，提供高壓力，減少溫差，節省電能。
双温型水循环模温机Adopting "CIRO" motor from Italy, ensuring high pressure, providing temperature error reducing and saving power.
●日本『OMRON』溫控器，觸摸式數字顯示微電腦雙組P.I.D，精確控制在±１℃內.
●Originally Japanese made "OMRON" temperature controller, P.I.D control and digital touch pad. Also it"s high precision±1℃
●採用日本[FUJI]、[OMRON]、意大利[ODE]、[OR].
●Electric parts use[FUJI]、[OMRON]、[ODE]、[OR]
●專利分離式控制箱設計，*斷絕水氣、油氣、熱量侵入，延長電氣零件壽命.
●Separay controlled box patently designed. Insulates the invading of moisture and thermal energy, thus extending the time span of electricity parts.
●連鎖防錯電路及實用故障指示，完整保護模溫機穩定工作,維修保養無需專業人員,.
●Chained anti-mistaken circuit and realistically malfunctioned instruction, entire protection of mold temperature controller en-sure the steady working conditions.
●採用304不銹鋼一體成型无缝管，減少管阻及鏽垢.
●316 stainless steel integrated pipelines for less pipe resistance and rust.
規格表 SPECIFICATIONS
| 機型 Model | DT-120 |
| 使用電源 POWER SUPPLY | AC3∮380V 50HZ OR OTHER |
| 溫控範圍 Temperature range | 室溫 5℃~120℃ |
| 溫控精度 Temp.control accuracy | P.I.D±1℃ |
| 傳熱媒體 Heat transfer medium | 水 CLEAN WATER |
| 冷卻方式 Cooling method | 直接冷卻 DIRECT |
| 泵浦馬力 Motor capacity | 2HP |
模具一 | 加熱能力 Heating capacity #1 | 6KW/9KW |
zui大流量 MAX FLOW RATE #1 | 50L/MIN | |
zui大壓力 MAX PRESSURE #1 | 4KG/CM2 | |
模具二 | 加熱能力 Heating capacity #2 | 6KW/9KW |
zui大流量 MAX FLOW RATE #2 | 50L/MIN | |
zui大壓力 MAX PRESSURE #2 | 4KG/CM2 | |
| zui大電力消耗 TOTAL POWER | 13.5KW/19.5KW |
| 警報功能 Alertfunction | 缺相/反轉/缺水/超溫/超載/超壓 |
| 冷卻水配管 Cooling water pipe | 1/2" |
| 循環水配管 Circulation water pipe | 3/8"×4進4出*2組 |
| 外型尺寸 LxH（CM） | 75×35×78 |
| 重量 Weight | 70KG |
●以上規格如有變更,恕不另行通知,以實機為准. ●特殊規格及多機一體機型可另設計製造.Special design request.
www.86pla.com/st13824/product_121059.html
所有评论仅代表网友意见，与本站立场无关。