| General Information | MW-L3 | |
| 锁模力 | Clamping Force | 20 T |
| 开模行程 | Max.Clamping Stroke | 230 mm |
| 拉伸行程 | Max.Stretching Stroke | 380 mm |
| 模具腔数 | Number of Cavities | 3 Cavities |
| 理论产量 | Theoretical Output | 0.1-0.6 L ; 1200 BPH |
| 模具厚度 | Max.mould Thickness | 300 mm |
| 模具尺寸 | Space Between Tie Bars | 280*500 mm |
| Electrical System | ||
| 电压 | Voltage | 380V/3PH/50HZ or Specail Order(支持定制） |
| 加热段数 | Number of Heating Zone | 2 Sections |
| Container | ||
| 瓶子容量 | Max.Container volume | 0.1-0.6 L(3Cav) |
| 瓶子口径 | Max.Diameter Range | 15-38 mm |
| 瓶子直径 | Max.Container Diameter | 35-75 mm |
| 瓶子高度 | Max.Container Height | 280 mm |
| Auxiliary System | ||
| 低压工作压力 | Low Pressure Air pressure | 8-10 Bar |
| 高压吹气压力 | High Pressure Air pressure | 30 Bar |
| 排气量 | Air Flow Rate | 1.2/30 |
| Dimension & Weight（L*W*H） | ||
| 吹瓶主机 | Bottle Molding Machine | 160*63*190 CM |
| 烘箱 | Oven | 138*62*140 CM |
| 重量 | Net Weight | 1 Ton |
所有评论仅代表网友意见，与本站立场无关。