产品介绍
◆ Product Introduction
本厂生产的高速印字机MH100是被动牵引式油墨印字机，主要用于电线、电缆、PVC软硬管、PU管、尼龙管、热缩管及其他配合挤出机之挤出材料的表面印刷。
High-speed printer MH100 produced by our factory is passive traction type of printing ink printer, mainly used for the surface printing of wires, cables, PVC soft and hard pipes, PU tube, nylon tube, heat-shrink tube and other extruded materials of other supporting extruder.
◆ 工作原理
◆ Operating Principle
利用挤出材料与印字轮之间的摩擦力，带印字轮转动，使印字轮表面的带有油墨的印字内容在被印物上。
The use of the friction between extruded materials and printing wheel, with the rotation of printing wheel makes the printing content with printing ink on printing wheel surface on the printed object.
◆ 主要技术参数:
◆ Main Technical Parameters
本机工作高度： 850mm----1150mm
Working Height of the Machine: 850mm----1150mm
适用印字轮外径： Ф86mm-Ф100mm
Outer Diameter of Applicable Printing Wheel: Ф86mm-Ф100mm
适用印刷范围： Ф0.7mm-----Ф50mm
Applicable Printing Scope: Ф0.7mm-----Ф50mm
印字机轴径： Ф20mm
Printer Shaft Diameter: Ф20mm
印字速度： ≤150m/min
Printing Speed: ≤150m/min
压轮上下调节距离： 40mm/80mm
Upper and Lower Adjustment Distance of Clamping Roller: 40mm/80mm
压轮前后调节距离： 50mm
Front and Rear Adjustment Distance of Clamping Roller: 50mm
导向轮上下调节距离： 80mm
Upper and Lower Adjustment Distance of Guide Wheel: 80mm
导向轮前后调节距离： 50mm
Front and Rear Adjustment Distance of Guide Wheel: 50mm
所有评论仅代表网友意见，与本站立场无关。