全自动PVC路锥注射成型机
KR14500-TZ
特点：
1. 低操作平台， 操作高度符合人体工学原理，操作方便科学。
2. PVC颗粒，粉料可以直接一次注射成型，各种反光路锥、路障柱体、方体等产品。
3. 模具简单，比传统注塑模具造价低廉，进一步降低投资成本。
4. 材料可回收，反复使用，产品位外表光洁油亮，不需要做任何及处理，成本低又环保。
5. 生产过程中，机器会自动开合模，双模芯自动左右转动机械手臂自动取产品，装卸模具、清洗模具便捷安全。
6. 机器采用编码器检测计算，并配合PLC/PC运程，达到全自动生产，工艺流程更加科学合理。
7. 人力需求少，产量更高，而且省电节能性突出。
Full automatic PVC road cones injection moulding machine
USE AND CHARACTER:
1. Low operation height, proper height of control platform fits the body engineering.
2. PVC power or granular material can directly injection all reflective Road cones Barricades cylinder or Barricades cube.
3. Automatically open –mould structure, easier to clean the mould, safer to get out of finished product.
4. Material cost is low. The material can be recycle for re-using. The technology will be more simple than tradition, the finished product is environmental protection and has good surface, no need to process, the cost will be low.
5. Automatically open-mould structure, easier to clean the mould, safer to get out of finished product.’
6. The date is calculated by the PLC/PC, makes the energy precisely controlled.
7. Few workers, high production, save energy.
| 项目Items | 单位Units | KR14500-LZ |
| 加工原料Material | Kind | PVC |
| 模位数Mould stations | station | 一模二芯 |
| 注射容量injection capacity | g | 3000/4500 |
| 额定注射压力injection pressure | kg/cm2 | 1200 |
| 螺杆直径Diameter of screw | mm | φ110/φ130 |
| 螺杆转速Rotate speed of screw | r/min | 1-100 |
| 合模力 Clamping pressure | kn | 3000 |
| 容模空间 Mold size | mm | 115*480*450 |
| 加热功率 power of heating plate | KW | 12.8 |
| 油泵压力Hydraulic pressure | Mpa | 21*1 |
| 电机功率 Power of motor | Kw | 45+37 |
| 总功率 Total power | Kw | 98 |
| 机器尺寸Dimension（L*W*H) | M(L*W*H) | 6.*3.3*3.2 |
| 机器重量machine weight | T | 28 |
所有评论仅代表网友意见，与本站立场无关。