产品名称：槽车取样管
Product Name: Car sampling tube
产品类别：液体取样器
Product categories: liquid sampler
产 品 说 明
The product that
槽车采取样管符合GB/T 2289《焦化粘油类产品取样方法》国家标准。
Tanker take sample tubes accord with national standard GB/T 2289 "coking viscous oil products sampling method".
槽车采取样管取样时，先将重砣提起，使取样管垂直于液面，缓缓的将取样管侵至槽车底部，关闭重砣，然后将取样管提起。用面纱擦去表面油品，再将采取的式样导入洁净，干燥的盛样容器内。其取样总量不能低于2000ml。
Tanker take sample tube sampling, the weight lifted, so that the sampling tube is vertical to the surface, slowly the sampling tube bottom invasion to tankers, off the heavy weight, then the sampling tube institute. With a veil to wipe the surface oil, style into will take clean, dry in containers. The sampling amount not less than 2000ml.
槽车采取样管材质：不锈钢；规格： ф32×3200mm 底部重砣可用绳引至管子上口
Tanker take sample tube material: stainless steel; specifications: Phi 32 * 3200mm at the bottom of the heavy weight can lead to the upper rope
注意事项：出口管线取样装置的设置应合理，保证所取样品应具有代表性。
Note: pipeline sampling device export settings should be reasonable, to ensure that the samples should be representative of.
储罐或船舱取样时，其罐内气压力或者船舱压力应该为常压或接近常压。
The tank or the cabin when sampling, the tank gas pressure or cabin pressure should be normal or nearly normal pressure.
取样时应站在上风处，并穿戴劳保用具。
Sampling should stand on the windward, and wear ppe.
取样结束后应将取样器具刷洗干净。
Sampling should be cleaned after sampling apparatus.
罐内油品取样时应具有足够的流动性。
Oil sampling tank should have sufficient liquidity.
更多 槽车取样管 请
More car sampling tube, please contact us