FJS-II方形玻璃钢通风机
FJS-II方形玻璃钢通风机该系列风机采用玻璃纤维和树脂模压成型，并使用直联式铸铝外壳电机（加涂防腐涂层）组合而成。具有较强的耐腐蚀性能，具有超低噪音、耗电少、风量大、便于安装等特点。是工业厂房、各类仓库、办公室、花卉温室、家禽舍房、电镀、氧化等场合防暑降温、抽排各类废气的理想通风换气选择。输送气体温度≤60℃，相对湿度≤99%。粉尘及硬质颗粒≤100mg/m3。FJS-II Square FRP Fan
The series of fans are molded by glass fiber and resin molding, and are combined with a direct connected cast aluminum shell motor (with coating coating). It has strong corrosion resistance, low noise, low power consumption, large air volume, easy to install and so on. Is the industrial workshop, warehouse, office, greenhouse flowers, poultry houses, plating, oxidation etc. sunstroke, selection of drainage ventilation of all kinds of waste gas. Conveying gas temperature are less than 60, the relative humidity is less than 99%. Dust and hard particles is less than 100mg/m3.
| 机 号 Model(No) | ||||
|---|---|---|---|---|
| 功 率 Power(Kw) | 转 速 Speed(r/min) | 流 量 Volume(M3/h) | 外形尺寸 (mm) | |
| 8# | 0.55 | 520 | 23000 | 1000×1000×500 |
| 9# | 0.55 | 520 | 27500 | 1060×1060×500 |
| 10# | 0.55 | 460 | 32000 | 1120×1120×500 |
| 12# | 0.75 | 460 | 37000 | 1220×1220×500 |
| 13# | 1.1 | 460 | 44500 | 1380×1380×500 |
外形及安装尺寸示意图 Lnstallation size diagram
产品为人工实物测量会有一定误差，相关数据仅作参考，以收到的实物为准。 单位Unit: mm(毫米）
| 机号 | |||
|---|---|---|---|
| 外形尺寸 | |||
| NO | L | D | B |
| 8# | 1000 | 1000 | 500 |
| 9# | 1060 | 1060 | 500 |
| 10# | 1120 | 1120 | 500 |
| 12# | 1220 | 1220 | 500 |
| 13# | 1380 | 1380 | 500 |
所有评论仅代表网友意见，与本站立场无关。