JK2M2208

两相混合式步进电机驱动器

2phase hybrid stepper motor driver

概述

JK2M2208 两相混合式步进电机驱动器，采用交流110V~220V，适合驱动电流小于8.0A,外径在110mm,130mm的混合式步进电机使用。电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，

Descriptions

JK2M2208 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 110V~220V AC . suit for currentless 8.0A, diameter is 110mm ,130mm 2 phase hybrid stepper motor . the motorrun smoothly. It is widely used in CNCmachine , robots,cutting machine,packing machine,plotter, engraving machine andso on.

特点

*平均电流控制，两相正弦电流输出

*交流110V~220V

*光电隔离信号输入、输出

*有过压­﹑欠压­﹑过流­﹑相间短路保护功能

*十六档细分和自动半流功能

*十六档输出相电流设置

*可驱动任何8.0A相电流以下两相、四相混合式步进电机,

*主要适合驱动110mm和130mm两相步进电机

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 110VAC~220VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*16channels subdivision and automatic idle-current reduction

*16channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A

*mainlyfor 110mm and 130mm 2 phase stepper motor

性能指标

输入电压 交流110V~220V

输出电流 0.5A~8.0A

温 度 工作温度-10°~45°，存放温度-20°~125°

环境湿度 不凝露，不结霜

气 体 禁止有可燃气体和导电灰尘

重 量 1700克

MechanicalSpecification

Input Voltage 110~220V AC

Output current 0.5A~8.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesａnd conductive dust

Weight 1700g

MechanicalDimension (mm)