ROS-2跑偏开关【】是湖北杭荣电气有限公司根据国外技术研发，产品
R0S-2防偏开关可固定在输送机纵梁的顶部或底部，动作臂距皮带边缘大约25到75mm。通常安装在皮带两侧距头部或尾部滚筒0.3到2米的地方。
ROS-2跑偏开关【】 用途
参数
皮带跑偏后，迫使动作臂偏离，触动PT微动开关。如果继续偏停到停机触点，触动另一组触点，输送机就会保护性停机。
设备描述
通用的安装设计可使防偏开关随意安装在输送机纵梁顶部或底部
坚固的铸铝外壳，防护??，环境可选表面处理
整体式盖板易于接线及调整
不需拆除动作杆就可拆掉盖板
动作杆轴承额定转速5000转/分，于皮带速度小于6.35米/秒
动作杆法向角调节范围为22.5⪚
法向夹角为10⪚时触点动作，法向夹角为20⪚时停机触点动作
应用范围
常规皮带输送机
地下、索道支撑皮带输送机
轮船装卸系统
堆垛/取料输送机
倾斜和梭式输送机
起重机/挖掘机起重臂限位
裙边给料机/输送机
重型极限开关
（原&lquo;美国&rquo;） 皮带机拉线防护器
Thermo Fisher Scientific offers a variety of components for monitoring conveyors an other bulk material hanling equipment, incluing the Pro-Line Safety Cle Pull Switch. These evis monitor operating prosses for potentially hazarous conitions an activate an alarm when they occur. This helps to keep your personnel safe, your equipment from being amage, your time from being waste, an your profits from becoming losses.
For Emergency or Normal Shut-Off
A safety pull cle is attache to the actuating arm of the Safety Cle Pull Switch an terminate at fixe mounts at either en of a conveyor. For applie to the pull cle at any position causes the actuating arm to move into a trippe-locke position an activates an alarm from one PT or two SPT micro-switches, alerting equipment circuits of the stop conition. This will stay locke until manually reset by the reset lever.
Options
Universal mounting plate
Seconary flag alarm
Complete hook-up acssories incluing: cle, clamps, stanoffs, lights
NEMA 4 an NEMA 9 Alarm Light
Special finishes for highly corrosive conitions
European tension spring-loae mounting harware
所有评论仅代表网友意见，与本站立场无关。