DS200TCCAG1A GE I/O TC2000模拟板-厦门雄霸电子商务有限公司

基本信息：DS200TCCAG1A GE I/O TC2000模拟板

/u003Cp/u003EThe environment for proper cooling begins when the drive is installed. The drive must be installed in a location with clean cool air that is free of dust and dirt. If the drive is mounted on a wall, the wall cannot have heat-generating equipment on the other side of it. In some locations, fans must be installed to provide the proper air flow. Is that is the case, make sure the fans are in good working order./u003C/p/u003E

/u003Cp/u003EMake sure the drive is installed in a location with plenty of room on all sides so that air can flow freely. Air is designed to enter the bottom of the drive and exit the top as heated air. It is heated as it passes over the hot components. Cable routing also ensures that air passes over the components. Makes sure the bundles of cables do not block air flow and block the air vents./u003C/p/u003E
"}">

产品说明

GE I/O TC2000模拟板ds 200 tcga 1 a具有一个80196微处理器和多个PROM模块。它还包含一个LED和2个50针连接器。从电路板的侧面可以看到LED。50针连接器的id是JCC和JDD。由于GE I/O TC2000模拟板DS200TCCAG1A is装有一个微处理器，因此必须将板保持在低温下，以使微处理器能够准确工作，并延长微处理器的寿命。过热会损坏微处理器，还会导致处理不准确。

安装变频器后，开始营造适当的冷却环境。驱动器必须安装在一个有干净的冷空气、没有灰尘和污垢的地方。如果驱动器安装在墙壁上，墙壁的另一侧不能有发热设备。在某些地方，必须安装风扇以提供适当的气流。如果是这样的话，确保风扇处于良好的工作状态。

确保变频器安装在四周有足够空间的位置，以便空气能够自由流动。空气从驱动器底部进入，并以热空气的形式从顶部排出。当它通过热部件时被加热。电缆布线还可确保空气从组件上方通过。确保电缆束不会阻碍空气流动和通风口。

DS200TCCBG8BED

Product Description

The GE I/O TC2000 Analog Board DS200TCCAG1A features one 80196 microprocessor and multiple PROM modules. It also contains one LED and 2 50-pin connectors. The LED is visible from the side view of the board. The IDs for the 50-pin connectors are JCC and JDD. Because the GE I/O TC2000 Analog Board DS200TCCAG1A is populated with a microprocessor, it is important that the board be kept at a cool temperature to enable the microprocessor to function accurately and also to prolong the life of the microprocessor. Excessive heat can damage a microprocessor and also lead to inaccurate processing.

The environment for proper cooling begins when the drive is installed. The drive must be installed in a location with clean cool air that is free of dust and dirt. If the drive is mounted on a wall, the wall cannot have heat-generating equipment on the other side of it. In some locations, fans must be installed to provide the proper air flow. Is that is the case, make sure the fans are in good working order.

Make sure the drive is installed in a location with plenty of room on all sides so that air can flow freely. Air is designed to enter the bottom of the drive and exit the top as heated air. It is heated as it passes over the hot components. Cable routing also ensures that air passes over the components. Makes sure the bundles of cables do not block air flow and block the air vents.

：

➤何姗姗（销售经理）

➤邮箱：sales

➤QQ ：

➤电话/微信：+86-

你可能感兴趣的：DS200TCCAG1A GE I/O TC2000模拟板

Rexroth VT-MVTW-1-16/D	ABB BDD110 HNLP205879R1	ABB XO08R2 1SBP260109R1001
Rexroth SYHNC100-NIB-23/W-24-P-D-E23-A012	ABB NSSM01	TRICONEX 3503E
TRICONEX TCM 4355X	GE 8910-PS-DC	GE IC695CRU320
TRICONEX MP3009X/TCM 4355X	SST SST-PB3-CLX	WOODWARD 9907-164
EMERSON VE3008 12P3439X012 KJ2003X1-BB1	MITSUBISHI A1S65B-S1	GE VMIVME-7750 VMIVME-7750-834 350-027750-834 D
ABB DSDX452L	ABB 5SHY3545L0010 3BHB013088R0001	GE 469-P5-HI-A20
BENTLY 3500/62-04-02	BENTLY 3500/40M 176449-01	NI SBRIO-9607
ABB ETP90H-4G50	BENTLY 3500/60 163179-01	LAM 810-800082-043
GE 469-P5-LO-A20-E	AUTOTECH CONTROLS SAC-RL100-M11T	GE IS215VCMIH2C
NI PCI-5421	UNIOP TCM08A	SST 5136-PFB-PCI
ABB 3BSE004258R1	YOKOGAWA AIP830-111	BENTLY 3500/40M 140734-01
GE 8910-PS-DC	SCHENCK VEG20400	BENTLY 3500/32 125712-01