应用程序
TM-25/200LP执行机构提供25mm(1英寸)的直线运动蒸汽或燃气轮机阀门。
描述
TM-25LP和TM-200LP执行器为电液驱动,用于定位的比例执行器蒸汽和燃料控制阀需要低/高力线性输入。
出厂设置决定是否执行器输出轴延伸或电流增大时收缩。
特性
执行机构具有铝制外壳和通过硬化的不锈钢内部部件。在供应入口配件中提供了40 μ m低容量屏幕,以保护扭矩电机伺服阀,以防外部过滤器失效。
该机组将运行离心或固定排量型泵提供液压压力。
执行器在工厂进行校准,以便在最小燃料方向上发生偏差输入电流损失。
双线圈扭矩电机是可选的冗余。双线圈执行器有一个可选的位置反馈传感器。
欲了解更多信息,请参阅伍德沃德手册82450。
✦产品参数:
输出轴
硬化17-4不锈钢0.625英寸(15.88毫米)圆,与一英寸方(645毫米²)17-4
不锈钢杆端连接0.375英寸(9.52毫米)/24螺纹/英寸螺纹。可选杆端
功能0.625英寸(15.88毫米)槽与0.500英寸(12.70毫米)孔销联动到阀门。其他
可供设计。
工作能力
TM-25LP 72 J (53 ft-lb), 2586 kPa (375 psig)
TM-200LP 231 J (170 ft-lb), 8274 kPa (1200 psig)
输出的力
TM-25LP 2833 N (637 lb),可承受2586 kPa (375 psig)
TM-200LP 9074 N(2040磅)在8274 kPa (1200 psig)在任何方向
响应时间常数(25%至75%步长)
TM-25LP在1724 kPa (250 psi)时0.065秒
690 kPa (100 psi)时0.150秒
TM-200LP在6895 kPa (1000 psi)下0.045秒
磁滞
TM-25LP±1%行程
TM-200LP±1%行程
边荷载
TM-25LP 222 N(50磅)
TM-200LP 222 N(50磅)
✦应用领域
对转矩电机的控制信号的变化导致终端轴位置的比例变化如下执行器、力矩马达、伺服阀是通过电子控制通电产生液压的差速器应用于第二级滑阀的末端。液压供应压力到伺服活塞由第二级滑阀控制,以移动双作用活塞并提供终端轴运动。内部机械反馈重新中心的扭矩电机挡板均衡压力横跨第二级滑阀,并停止终端轴运动。
Application
The TM-25/200LP actuators provide25 mm (1 inch) of linear movement of valves for steam or gas turbines. Description
The TM-25LP and TM-200LP actuators are electric-hydraulic, proportional actuators for positioning steam and fuel-control valves requiring low/high force linear inputs.
Factory setting determines if the actuator output shaft extends or retracts on increasing current.
Features
The actuators have aluminum cases and through-hardened stainless-steel internal parts. A 40 µm low-capacity screen is provided in the supply inlet fitting to protect the torque motor servovalve in case of failure of the external filter.
The units will operate with either centrifugal or fixed-displacement type pumps providing hydraulic pressure. The actuators are calibrated at the factory for bias in the minimum-fuel direction in event of the loss of input current.
A dual-coil torque motor is optional for redundancy. The dual-coil actuator has an optional position-feedback transducer.
For more information, refer to Woodward Manual 82450.
所有评论仅代表网友意见,与本站立场无关。