日本JST西南地区热卖RCD-M9BE全自动绝缘置换机

日本JST西南地区热卖RCD-M9BE全自动绝缘置换机产品介绍

RCD-M9BE是一款全自动绝缘位移机，用于加工2mm和2.5mm斜距带状电缆。
该机器设计用于切割，切槽，半切割或整条切割，并预先形成导线的末端以便插入PCB。它还将同时将ID连接器端接到电缆的一端或两端。

The RCD-M9BE is a Fully Automatic Insulation Displacement Machine used to process 2mm and 2.5mm pitched ribbon cable.
This machine has been designed to cut, slot, semi or full strip and also pre-form the ends of the wire for PCB insertion. It will also simultaneously terminate ID connectors onto one or both ends of the cable.

日本JST西南地区热卖RCD-M9BE全自动绝缘置换机产品规格

• 电源：200V AC，3相，2.5kVA
• 气压：590至640 kPa（6至6.5kgf / sq.cm）
• 耗气量：约。500N升/分钟
• 安装尺寸：约。6,310x1,250x1,785mm
• 重量：约 1100公斤
• 线束类型：双端线束
  单端线束（带全/半带或预制）
• 线束长度：53至1,300mm
• 带材长度：半剥离5至13mm
  剥离3至13mm
• 线长准确度：+/- 2mm
• 处理能力：每小时550次循环（基于400mm的长度）
• 适用连接器：JST'S 2.0mm和2.5mm间距绝缘位移连接器

• Power Source: 200V AC, 3 Phase, 2.5kVA
• Air Pressure: 590 to 640 kPa (6 to 6.5kgf/sq.cm)
• Air Consumption: Approx. 500N litre/minute
• Installation Dimensions: Approx. 6,310x1,250x1,785mm
• Weight: Approx. 1,100kg
• Type of Harness: Double-ended Harness
  Single-ended Harness (with full/semi-strip or pre form)
• Length of Harness: 53 to 1,300mm
• Strip Length: Semi stripping 5 to 13mm
  Full stripping 3 to 13mm
• Wire Length Accuracy: +/-2mm
• Processing Capacity: 550 cycles per hr (Based on a length of 400mm)
• Applicable Connectors: JST'S 2.0mm and 2.5mm pitch Insulation displacement connectors

日本JST西南地区热卖RCD-M9BE全自动绝缘置换机适用连接器：JST'S 2.0mm和2.5mm间距绝缘位移连接器

日本JST西南地区热卖RCD-M9BE全自动绝缘置换机的处理能力：每小时550次循环（基于400mm的长度）