主要零件和材质 Main parts and materials

产品结构特点 Construction features

1、 超长寿命设计 

阀座、密封圈*由金属材料制成，且做表面硬化处理，就算启闭频繁，阀门仍能保持高的密封性能，杜绝了多层次密封结构不耐冲刷等弊端，极大提高了阀门的使用寿命；

2、依靠扭矩密封 

阀门至始至终都能保持*的双向密封性能，阀门密封不依靠介质力，*由驱动装置提供的扭矩实现密封，阀门在高、低压下均能可靠密封。密封性能检测结果符合API609、ISO5208等标准之规定；

3、阀座/密封圈可现场更换

可更换式阀座/密封圈设计，便于阀门现场维护保养；

4、填料密封的高性能

采用组合式填料密封系统，确保阀门泄漏率≤20ppm。可选用动载密封结构，使填料持久密封，延长填料免维护周期；

1. Long life design

Seat, sealing completely made of metal materials, and surface hardening treatment, even if the opening and closing is frequent, can still maintain a high sealing performance of the valve, put an end to the multi-layer sealing structure not scour resistance and other shortcomings, greatly improve the service life of the valve;

2. Rely on torque seal

Valve throughout can keep superior two-way sealing performance and valve sealing force does not rely on media, completely provided by the drive torque seal, valve can reliable sealing under high and low pressure. The sealing performance test results are in accordance with the standards of API 609 and ISO5208.

3. The seat/sealing ring can be replaced on site

Replaceable seat/sealing ring design to facilitate valve site maintenance;

4. High performance of packing seal

The combined packing sealing system is adopted to ensure the maximum leakage rate of valve is less than 20ppm. The movable seal structure can be used to keep the stuffing durable and prolong the packing period.

产品特征 Spericfications

适用介质：水、气、油品、天然气和酸碱腐蚀性介质

适用温度：-196~350℃

驱动方式：手动、气动、电动、液动等

公称压力：1.0~6.3MPa

公称通径：DN100~3600mm

Applicable media: water, gas, oil, gas and acid and alkali corrosive medium

Applicable temperature: -196~350℃

Driver: manual, pneumatic, electric, hydraulic, etc

Nominal pressure: 1.0~6.3MPa

Nominal size: DN100~3600mm

技术规范 Technical specification

试验压力 Test prssure

 蝶阀结构长度和外接尺寸 Main connection dimensions