宝德8031型流量变送器，BURKERT8031压力变送器

Rate of solid particles max. 1%
Measuring range 0,5 m/s to 10 m/s
Accuracy ≤ ±1 % of the full scale*, with calibration on site (for example, using the teach-in feature of a
transmitter 8025, remote version)
≤ ± (1 % of the full scale* + 3% of the measured value), with standard K factor
Linearity ≤ ± 0.5 % of the full scale*
Repeatability 0.4% of the measured value
Measuring element metallic paddle-wheel of the stainless steel S030 HT fitting
* full scale = 10 m/s
Electrical features
Sinus version
Power supply none
Output data up to 500 Hz, about 2.8 mV peak-to-peak/Hz when loaded with 50 kΩ
(frequency = 2 x K factor x flow rate; for the value of the K factor, refer to the instruction
manual of the fitting)
Cable length max. 5 m, shielded
Always check the chemical compatibility of the materials the sensor is
made of with the products it may be in contact with.
For more information, please contact your Bürkert sales office.
4.2 M ounting on the pipe
The electronic module SE30 HT is associated to an S030 HT fitting for
installation on a pipe.
During mounting, follow the instructions given with the fitting S030 HT.General features
Pipe diameter DN6 to DN50 (DN65 on request); determine the appropriate diameter using the flowvelocity-
DN diagrams (see Annex)
Medium temperature -15 °C up to 160 °C
Medium pressure PN40, for the whole temperature range
Medium viscosity max. 300 cSt

宝德8031型流量变送器，BURKERT8031压力变送器

8031型在线式流量变送器包括S030型在线式接头和SE35型电子模块两部分。当液体流过管道时，涡轮开始旋转并在发送器中产生一个与流量成正比的频率信号，该信号由变送器转换成各种输出信号。8035型变送器的输出信号为与流量成正比的标准4-20mA信号和脉冲信号。此外，该变送器带显示器、2个累加器（主累加器和辅累加器）和2个可自由编程的继电器。带2个继电器输出时，该变送器就变成了开关控制器。电池供电式可用于现场显示流量值和累加值。批量控制器具有2个累加器、2个继电器和3种批量触发模式（现场通过按键触发、通过二进制输入触发和通过PLC脉宽调制触发）。便捷的操作菜单包括一些如在线校正K系数（Teach-in）、流量模拟等特殊功能。8035型适用于中性和腐蚀性介质。
宝德8031型流量变送器，BURKERT8031压力变送器