类型：回转式系列
Type: Live centers series
负荷：轻
Duty: Light

适 用：一般车床使用。

Application: Center lathe

用 途：适用一般轴心车削加工(细长型车削加工)。

Working Usage: Applicable for ordinary turning process, slender workpiece turning process

结 构：採用合金钢材，经热处理硬度达57°~60°,内外径研磨製成。

Structure: Made of alloy steel and hardened to HRC 57-60, ground on ID and OD

精准度： 0.002以内

TIR Less than 0.002mm

规格 / Specification 单位/ UNIT：mm

型式/外表尺 Model/Spec	A	B	C	D	D1	d	G	L	?	轴承高转 Max. RPM	轴承轴向（推力 Max. axial thrust force
SC-93-L-2	51	117	6	48	32	12	17.780（MT2)	186	60゜	3,500rpm	160kg
SC-93-L-3	51	117	8	48	32	12	23.825（MT3)	204	60゜	3,000rpm	250kg
SC-93-L-4	51	117	9	48	32	12	31.267（MT4)	225	60゜	2,600rpm	400kg
SC-93-L-5	51	122	9	59	32	12	44.399（MT5)	257	60゜	2,200rpm	800kg

备注：
本顶针使用SKF-LGMT2润滑油，请勿使用其他不同成分之润滑油。
产品型号中有“A"的表示顶针有附螺帽
径向力数据参考：加工件重量+车削力量
配件中的顶针子，型号有“A"的为加长型顶针子。
轴向力据参考：尾座油压压力数据
非标需求可定制
保留技术更改的权利

Remarks
1,For the lubricating oil,SKF-LGMT2 is designated,others aren't allowed
2,if "A" is behind the center model name,it denotes a draw-off nut attached.
3,About radial force data, please refer to workpiece weight and machining force.
4,if "A" is behind the center interchangeable tip name,it denotes the tip is extended length.
5,About axial force data, please refer to the hydraulic pressure data of the tailstock.
6,For live centers, SKF lubricating oil is designated, it is waterproof.
7,Customized order can be accepted.
8,Subject to technical changes.

配件详情页/Accessories Page
技术要点与使用说明/Center technical user manual